Cordless 1/4" Hex Impact Driver, Dual Voltage
- 1/4"" Hex Drive
- Dual Voltage IP Li-ion Compact Impact Driver (Tool Body Only)
Our professional tools are ergonomically designed with worker safety top of mind. Lightweight and balanced with a cushioned grip and virtually no torque reaction reduces operator fatigue and injury while creating a healthier, more productive work environment. A modern cordless design allows total freedom of movement inside vehicles and tight work spaces for greater production efficiency.
Dual voltage backward compatible, uses 18V & 14.4V batteries
While creating this new series of cordless power tools Panasonic kept you top of mind as usual. Our dual voltage technology enables backward compatibility, allowing use of a 14.4V battery or earlier generational 18V batteries. Each battery has benefits. The 14.4V batteries is lighter and smaller for better ergonomics, while the an 18V battery offers longer runtime. The tool automatically detects battery voltage for best performance.
Tough IP™ | IP56 rating for harsh condition protection
Whether dusty settings or wet locations, tradesmen now have a tool that can stand up to the rigors of extreme conditions on the jobsite. Panasonic Tough IP™ (Intelligent Power) technology protects your tools against harmful outdoor elements. With an IP56 rating - based on IEC Standard 60529 - your tool is protected from dust and powerful water jets so you can get the job done in the harshest environments.
High efficiency brushless motors
Our high-powered brushless motors generate cooler operating temperatures which improve efficiency and performance while greatly increasing tool life. Rare earth magnets promote faster working speeds, high power density, 2X longer life and 25% greater energy efficiency than brushed motors. Compact motor size reduces physical length of tool for increased maneuverability. Increase ROI with a high-power low-maintenance motor ideal for heavy load applications.
Long-life hybrid switches
The switch on your power tools is usually the first thing to malfunction. Our hybrid switch solves this problem. Carrying less than 0.5 amps, compared to 20-30 amps for conventional tools, our hybrid switches nearly double the life of your new Panasonic tool. This low amperage working current prevents premature deterioration of contacts, drastically reducing downtime and costly repairs. The result is a 2X longer life than conventional switches.
Light up dark work areas
A built-in LED light allows operators to illuminate the work area for fast, accurate assembly. Ideal for gaining better visibility in tight, enclosed or deep dark spaces. The auto shut-off features turns light off after five minutes of idle operation to conserve battery power.
Ultra long life Li-ion battery pack
Our same Li-ion technology that powers the world’s most advanced electric cars also powers our cordless assembly tools. GuardION system protection ensures long life and safety as the tool, battery and charger work together as a single energy-efficient eco system. Sensors prevent overcharging/discharging to avoid cell damage and extend battery life. Automatic power shut-off at the battery prevents overheating, doubling battery life over conventional Li-ion battery packs.
Self-drilling screw mode
Self-drilling screw mode saves time and headaches in metal work application. It starts at the highest speed to drill through the metal then switches to high impact mode to powerfully cut initial thread. Load is then reduced and automatically switches to soft impact mode to limit potential of stripping threads.
- Self-Drilling Screw Mode yes
- Battery Indication Lamp Yes
- Brushless Motor Yes
- Chuck Size 1/4" Hex Quick Connect Collet
- Drive 1/4" hex quick change chuck
- Dual Voltage Capable Yes
- Electric Brake Yes
- Hybrid Switch Yes
- Impact Per Minute 0 - 3,100 ipm (high/hard mode) 0 - 2,900 ipm (medium mode) 0 - 1,900 ipm (low/soft mode) 0 - 1,200 ipm (self drilling screw mode)
- IP56 Approved Yes
- Maximum Torque 1,416 in. lbs.** (high/hard mode) 1,150 in. lbs.** (medium mode) 230 in. lbs.*** (low/soft mode) 1,150 in. lbs.** (self drilling screw mode)
- No Load Speed (RPM) 0 - 2,500 rpm (high/hard mode) 0 - 1,450 rpm (medium mode) 0 - 950 rpm (low/soft mode) 0 - 2,500 rpm (self drilling screw mode)
- Type Impact Driver
- Variable Speed Yes
- Voltage 18V/14.4V
- additional info **M14 High tensile bolt tightening for 3 sec.. ***M10 High tensile bolt tightening for 3 sec.
- UPC 885170235427