Images
overview
Panasonic SC-HTE1 Amplifier Speaker System
Details
http://shop.panasonic.com/support-only/SC-HTE1.html
SC-HTE1
Features
- Dual 20W speakers & amplifier system
- Connect to TV via Earphone Jack
- Voice Clarity Technology Improves Sound
- Full Rnge 2.5" Cone Type Speakers
- Smart Remote Feature for Volume Control
- Also Works with iPods & MP3 Players
SpecificationsExpand All
-
AUDIO SYSTEM
- Output Channel 2.0ch
- Power Output (RMS)
- Total Power 40W
- Front 20W x 2 (1kHz, 6ohms, 10% THD)
- Power Output (FTC)
- Total Power 30W
- Front 15W x 2 (20Hz-16kHz, 6ohms, 10% THD)
-
High Quality Sound
- Clear-mode Dialog yes
- Bamboo Cone Speaker yes
- High Performace DSP (Digital Signal Processor) yes
-
Easy to Use
- Multi-Positional Speakers yes
- Only one Cable Connection yes
- Auto Power System yes
- Wall-Mountable yes
-
Speaker System
- Front
- Configuration (per channel) 1 way 1 speaker, Bass-reflex
- Speaker Unit [Approx.] Full Range: 2-1/2" Cone Type
-
Terminal
- Analog Audio Input
- 3.5mm (1/8") yes(AUX)
-
Others
-
Power Supply AC 120V, 60Hz - Power Consumption (Total)
- Normal Use [Approx.] 10W
- Standby [Approx.] 0.1W
-
-
Dimensions, Weight
- Main Unit (Vertical Setting)
- Dimensions (W x H x D) [Approx.] 2-11/32 x 7-3/8 x 7-7/8 inch
- Weight [Approx.] 2.1 lbs.
- Main Unit (Horizontal Setting)
- Dimensions (W x H x D) [Approx.] 7-3/8 x 2-13/32 x 7-7/8 inch
- Weight [Approx.] 2.1 lbs.
- Front [Vertical Setting (with stand)]
- Dimensions (W x H x D) [Approx.] 4-5/16 x 13-7/16 x 4 -11/32 inch
- Weight [Approx.] 1.8 lbs.
- Front (Horizontal Setting)
- Dimensions (W x H x D) [Approx.] 9-9/32 x 3-1/16 x 3-13/32 inch
- Weight [Approx.] 1.4 lbs.
- Front [Vertical Setting (wall-mount)]
- Dimensions (W x H x D) [Approx.] 2-15/16 x 9-9/32 x 3-9/32 inch
- Weight [Approx.] 1.4 lbs.
-
Further Specifications
- NOTE Specifications are subject to change without notice. Weight and dimensions are approximate.
-
- UPC 885170078123
Reviews
Support
Owner's Manuals
Warranty
FAQs
-
What do I do in the unit has no power?If the unit is not powering on, remove the power cord plug from any power strip it may be connected to and plug directly into the wall outlet.
-
How do I connect a Panasonic home theater system to my TV?Panasonic recommends that you use an HDMI cable to connect the HDMI output of your Blu-ray disc player to the HDMI input on your TV. Then place your TV on the correct HDMI input using your TV remote control.
-
What should I do if I am not getting any sound from the center or the right speaker?Center Speaker
Check the speaker wire connection on the back of the unit. Unplug the speaker wire from the back of the unit, and then reinsert it into the center speaker slot on the back of the unit. Next, go to the unit's audio settings and perform a speaker test. If you are using a stereo channel source or the unit has no center channel encoded, turn on the "Super Surround" option.
Right Speaker
The right speaker of the center channel is a "Super Tweeter" it along with the full range speaker produce a more natural sound even though you may not hear audio coming from the super tweeter. Super tweeters produce high frequencies which may not be heard at all times.
-
How do I use the ARC feature with my home theater system?ARC is an abbreviation for Audio Return Channel. To use this feature the HDMI cable you are using must be compliant to HDMI v1.3 spec or later. Older cables may not work correctly.
VIERA Link can work with either the HDMI- ARC feature of a compatible TV.
For ARC usage make sure that the systems HDMI ARC port is connected to the TVs ARC port.
1. Press [HOME].
2. Select "Others" icon and press [OK].
3. Select "Setup" and press [OK].
4. Select "Audio" and press [OK].
5. Select "TV Audio Input" and press [OK]. Then select the "ARC" option.
Afterwards the TV's ARC feature will control the home theater system and the sound from the TV will be heard through the systems speakers.
CONTACT INFORMATION
Consumer Product Support and Technical Assistance
Operating hours:
Mon-Fri 9am-5pm EST
