overview

Steam/Dry Iron with Titanium, Non-Stick Coated Curved Soleplate

Details
NI-E300TR
Features
  • Titanium, Non-Stick Coated Curved Soleplate
  • Temperature Ready Indicator Light
  • 3-Way Auto Shut-Off
  • Automatic Retractable Cord Reel
  • Large Water Window

Features

Titanium with Non-Stick Coating Curved Soleplate An iron with a curved soleplate concentrates pressure at the center of the iron, instead of at the tip, so there is less tugging, snagging, and minimal wrinkling.

Spray MistThe push-button spray mist lets you direct extra moisture where needed.


Jet-of-Stream/Self CleaningA powerful burst of steam helps remove stubborn wrinkles. This feature also helps clean the iron steam vents.



Adjustable Steam Three steam settings can be selected — “high steam” for heavier fabrics, “low” steam for touch-ups, as well as “dry” for no steam output.

Temperature Ready Indicator LightConvenient temperature-ready indicator light display signals that the temperature setting is on or off.

Dial Temperature ControlThe easy-to-use dial temperature control maintains the selected temperature accurately.

3-Way Auto Shut-OffThe mercury-free sensor automatically shuts off the iron after 10 minutes if left in the upright position and after 1 minute if left unmoved on its soleplate or if tipped over on its side.


Automatic Retractable ReelWith just a push of a button, the cord automatically retracts into the reel house, eliminating messy storage.

Large Water WindowAllows you to see when you need to fill up at the sink.

Rubber Grip HandleErgonomically designed for comfort.

Reviews

Support

FAQs
  • What support content is available for my product?

    Click on a link below that interests you the most:

    • Panasonic Community - Join our Community and participate in Discussions where you can learn more about our Products. You will also be able to get advice from other members and Product Experts, as well as documents, FAQ’s, tutorials, and updates.

    • Live Chat - Chat with a representative from 9am-9pm Monday-Friday and 10am-7pm Saturday/Sunday EST.

    • Email Contact - For email inquiries, send them to panasonicwebcasesf@us.panasonic.com, you will receive a response within 24-48 hours.

    • Parts/Accessories - Order parts and/or accessories from our supply chain, Encompass.

    • Service Locator - Locate the closest Authorized repair center to you for TVs, Microwaves, Vacuums, or Massage Chairs.

    • Service Request - If you need a product repaired and is NOT a TV, Microwave, Vacuum, or Massage Chair, you can use our Online Repair Request. There, you will be able to get a repair estimate, pay online, and track the repair status.
  • Will my steam/dry iron stick to fabric when spray starch is used while ironing?
    No. The steam/dry iron will not stick to the fabric when ironing with starch.  Selecting the correct temperature will prevent fabric from sticking to the iron.
  • What is the recommended voltage for this steam/dry iron?
    The recommended voltage for this steam/dry iron is 120V.
  • Water spotting occurs when I am using the "Jet of Steam" function on this steam/dry iron. How can I fix this issue?
    The "Jet of Steam" function only operates properly when using the High temperature setting. Water spotting will occur in lower settings
    because the steam/dry iron is not hot enough to change the water to steam. To prevent water from dripping out of the soleplate after jetting steam, allow approximately 5 seconds of interval time before re-pumping steam.
  • The steam/dry iron is emitting a white powdery substance while ironing, especially when using the Jet of Steam function. How can I fix this issue?
    The powder or particles are impurities and minerals found in water. These particles can be brushed off  the clothing or fabric.
  • Sometimes my clothes become discolored or marked after they have been ironed. How can I fix this issue?
    Set the temperature correctly according to the fabric being ironed. If there is cleaning residue on the fabric, the clothes may become brown after being ironed.
  • Is it necessary to use distilled water in my steam/dry iron?
    Using regular water may cause build up of calcium or lime in the iron's steam vents. We suggest using distilled water to prevent this build up from occurring.
  • I can no longer power on this steam/dry iron. How can I fix this issue?
    Check to make sure that the power cord is securely inserted into the wall outlet. If it is connected properly, try another power outlet.
  • How can I use the spray function on this steam/dry iron?
    The spray feature is useful mainly when trying to remove stubborn wrinkles and where extra dampening is needed. This function may be used for steam or dry ironing. To use the spray function simply press the "Spray Mist" button whenever spray is desired. If spray does not come out immediately, keep pressing until it comes. To get a finer spray, press the button vigorously and to get a more powerful spray, press the button more slowly.
LOAD MORE FAQs
CONTACT INFORMATION
Consumer Product Support and Technical Assistance
Operating hours:
Mon-Fri 9am-9pm EST
Sat-Sun 10am-7pm EST
Panasonic USA