Images KX-TG6641B, , HeroImage
overview

Expandable Digital Cordless Answering System with 1 handset

Details
KX-TG6641B
Features

Expandable Digital Cordless Answering System with 1 handset

SpecificationsExpand All

  • More Details
    • Color
    • Channels
    • Multi Handset (Capability)
    • Handset Locator
    • Number of Phone Lines
    • Call Block
    • Frequency
    • System
    • Shipment Battery
    • Battery Life (Talk)
    • Battery Life (Standby)
    • Charge Time
    • LCD Backlit Color
    • Handset Indicator
    • LCD (Handset)
    • Backlit Keypad
    • Hold/Soft Key
    • Talk Volume(Handset)
    • Speakerphone Volume(Handset)
    • Headset Jack
    • Ringer Volume(Handset/Base)
    • Ringer Pattern (Tone+Melody)
    • Belt Clip
    • Redial Memory (Handset)
    • Mute/Flash Buttons
    • Intercom (Handset to Handset/Handset to Base)
    • Conference Call with Outside Line
    • Call Sharing
    • Auto Talk
    • Clock/Alarm
    • Menu Operation
    • Wall Mountable
    • Silent Mode
    • Number of LCD Language Display
    • Caller ID Compatible
    • Caller ID Memory
    • Phonebook Memory (Name and Number)
    • Chain Dial
    • Ringer ID
    • Voice Mail
    • Base Dimensions H x W x D (in.)
    • Handset Dimensions H x W x D (in)
    • Charger Dimensions H x W x D (in.)
    • Base Weight (lbs.)
    • Handset Weight (lbs.)
    • Charger Weight (lbs.)
SEE FULL SPECS

Warranty

Warranty information

FAQs

  • How do I clear 'New Voicemail' on my handset's display?
    Your telephone is alerting you that you have a new voice message from your phone company's assigned Voice mailbox. Procedure to access your voice mailbox would vary depending on the instructions of your phone company / service provider. Once you listen to your new messages, "New Voicemail" should be cleared from the handset/
    Note: If the handset still indicates there are new messages even after you have listened to all new messages, turn it off by pressing and holding [#] until the handset beeps.
  • How do I check my voicemail using the handset?
    Some phone companies provide a flat-rate service which includes voice mail, it is a voice mailbox system assigned to your phone line that stores telephone messages which can be retrieved at a later time. Procedure to access your voice mailbox would vary depending on the instructions of your phone company. In order to listen to your voice mail messages, you must dial your service provider/telephone company's voice mail access number. Once you have stored your voice mail access number, you can dial it automatically by pressing the soft key for [VM] on the handset
    Note that the function [VM] will not appear on the display if you haven't stored your the voicemail number provided by your phone company to the Panasonic telephone. To store your voicemail access number, follow the procedure below:
    1. On the handset press [MENU] then press the pound sign [#]
    2. Press [3] [3] [1]
    3. Dial your voice mail access number
    4. Press [SAVE] then press the OFF button

    If you do not know what is your Voicemail access number, PIN or password, please contact your phone company.
  • How do I change the ringer tone of my handset?
    To change the ringer tone of the handset. Press [MENU] on the handset then press [OK] to Select "INITIAL SETTING". Press [OK] again for "RINGER SETTING". Press [▲] or [▼] repeatedly to get to "RINGER TONE" then press [OK] you can choose from the selection on the phone by pressing [▲] or [▼] Press [OK] to select your desired ringer tone.
  • How do I change the remote code to access my machine when I'm away?
    A 3-digit remote access code must be entered when operating the answering system remotely. This code prevents unauthorized parties from listening to your messages remotely. To prevent unauthorized access to this product, we recommend that you regularly change the remote code. To change your answering machine's remote code do the following procedure: On the handset, press [MENU]. [#] [3] [0] [6]. Enter your 3 digit remote code. Press the soft key [SAVE] then press OFF.
  • How do I change the group name?
    You can change the group name of your shared phonebook by following these procedure:
    1. On the handset press the soft key below the phonebook icon then press [MENU]
    2. Press the [▲] or [▼] button to highlight "Group"
    3. Scroll to the group you wish to edit and press [SELECT]
    4. Press [SELECT] again on "Group name"
    5. press the number pad corresponding the letters on the keys to enter your preferred group name, note that you can only enter up to 10 characters
    6. Press [SAVE] then press [OFF]
    .
  • How do I change the display language on my handset?
    You may change the display language and the voice guidance of the answering system.
    For the Display language:
    1. Make sure that the phone is not in use, press [MENU] on the handset
    2. Press [#] [1] [1] [0]
    3. Select your preferred language from the 2 options, highlight either English or Spanish by pressing the [▲] or the [▼] button
    4. Press down the center of the joystick to save your setting then press OFF

    To change the voice guidance for the answering system, follow these steps:
    1. On the handset press [MENU], then press [#] [1] [1] [2]
    2. Select your preferred language from the 2 options, highlight either English or Spanish by pressing the [▲] or the [▼] button
    3. Press [SAVE]
  • How do I change the dial mode from tone to pulse?
    To change the dial mode on the phone, do the following procedure:
    1. On the handset press [MENU]
    2. Press [#] [1] [2] [0]
    3. Select your desired setting
    4. Press [SAVE] to retain the setting
  • How do I change my remote access code for my answering machine?
    A 3-digit remote access code must be entered when operating the answering system remotely. This code prevents unauthorized parties from listening to your messages remotely.
    To prevent unauthorized access to this product, we recommend that you regularly change the remote code. To change your answering machine's remote code do the following procedure:
    1. On the handset press [MENU]
    2. Press the pound sign, [#] [3] [0] [6]
    3. Enter you 3 digit remote code
    4. Press the soft key [SAVE] then press OFF
    . Click here for Help & Tutorials
  • How do I chain dial from this phone?
    This feature allows you to dial phone numbers in the phonebook while you are on a call. This feature can be used, for example, to dial a calling card access number or bank account PIN that you have stored in the phonebook, without having to dial manually. Proceed in calling the number you need to contact then, start chain dialing by pressing [Ph.book] on the handset. Select your desired entry from the phonebook items then press [CALL], the phone should automatically dial the number.
  • How do I block calls on this telephone?
    You can only store up to 30 phone numbers on your call block list. While the phone is not in use, press the [◄] on the handset then press the [▲] or the [▼]to scroll thru the numbers on the caller list, as soon as you have the phone number displayed on the screen, press [SELECT] then press [SAVE]. Press the [▲] or [▼]on the handset till "Call Block" is displayed on the screen and press [SELECT]. Press the [▲] or the [▼] so you can highlight, "YES" then press [SELECT]. You can edit the phone number if necessary, then press [SAVE]
    You can also enter phone numbers on the list by pressing [MENU] [#] [2] [1] [7] on the handset. Press [ADD] Enter the phone number you want blocked, then press [SAVE].
  • How do I adjust the brightness of the screen on my handset?
    You can adjust the LCD contrast of the handset by following these procedure:
    1. Make sure that the handset is not in use. On the handset press [MENU]
    2. Press [#] [1] [4] [5]
    3. There are 6 levels of selection. Press any of the number keys from 1 - 6
    4. Press the soft key [SAVE] then press [OFF]
  • How do I adjust ringer volume?
    To adjust the ringer volume on the handset, press [MENU] [#] [1] [6] [0] and press [▲] or [▼] to raise or lower the ringer volume.
  • How do I adjust incoming ringer volume?
    To adjust the ringer volume of the handset or Base unit. Press [+] or [-] on the base or [▲] or [▼] on the cordless handset repeatedly to select the desired volume while the unit is ringing for an incoming call.
  • How do I add a Phonebook entry?
    On the handset press the Phonebook icon then press [ADD] then press the number pad corresponding the letters on the keys. (note that you can only add up to 16 characters) Press the soft key [OK]. Dial the number you wish to store and press [OK]. Press [SELECT] twice upon selecting a group name then press [OFF] to exit the setting. Click here for Help & Tutorials
  • How can I use the mute feature?
    While mute is turned on, you can hear the other party, but the other party cannot hear you. [MUTE] is a soft key visible on the display on the handset only during a call. You can press the soft key anytime during a call. Press [MUTE] again to return to the conversation.
  • How can I switch to speaker phone on my handset?
    You can switch to speaker phone by pressing the speaker phone button on the handset and if you would want to get to the regular talk mode on the phone just press the [TALK] button on the cordless phone.
  • How can I re-register my handset?
    To register a handset, perform the following steps:
    1. Press [MENU] →[#] [1] [3] [0] on the Handset
    2. Press and hold down the locator button on the base for about 5 seconds until you hear the registration tone (If all registered handsets starts ringing, press LOCATOR again to stop, then repeat this step, procedure needs to be completed within 90 seconds
    3. Press [OK] on the handset.
  • How can I register the warranty of my phone?
    You may register your products online by going to: &lt;a target="_blank" href="https://secure2.prodregister.com/panasonic/">https://secure2.prodregister.com/panasonic/</a>. It is not necessary to submit this form in order to effectuate the limited warranty. As long as there is a copy of the receipt, Telephone is warranted for a year starting from the date of purchase.
  • How can I register for the warranty of my product?
    You may register your products online by clicking here. It is not necessary to submit this form in order to effectuate the limited warranty. As long as there is a copy of the receipt, your product warranty begins from the date of purchase.
  • How can I conference call using multiple handsets?
    A maximum of 4 parties (including 1 outside party) can join a conversation using 3 extensions. (4-way conference)
  • Does this model have a speed dial feature?
    Yes. The system have 3 touch dial buttons on the base. You can only perform your speed dial using the base unit.
  • Does my phone have Bluetooth capability?
    No. This model does not support Bluetooth connectivity.
  • Does my model have a room monitor feature?
    No, this model does not have a room monitor feature.
  • Does my handset have a headset jack?
    Yes, the handset included in this system has a 2.5 mm headset jack. We recommend using the Panasonic headset model: To order additional/replacement accessories, call 1-800-332-5368 or visit www.panasonic.com.
  • Does it have speaker phone?
    Yes. The base unit has a speaker phone option and the handsets have them too.
  • Does it have an audible message alert wherein the phone beeps when I get messages on the machine?
    No, the Answering system does not have an audible alert, when you receive new messages on your machine it will only have the message indicator flash but it will not beep.
  • Can I wall mount this phone?
    Yes. The base unit has a built-in wall mounting adaptor. It can be mounted on a wall by revolving the bracket to WALL position (default: DESK stand position). Note: Make sure that the wall is strong enough to support the weight of the unit.
  • Can I use a corded headset?
    Yes. The handsets would have a 2.5mm inlet for a corded headset.
  • Can I still restore phonebook items that I have erased?
    No. The phonebook items are not retrievable. Once it's erased from the phone there is no way to retrieve them back.
  • Can I put a belt clip on the handset?
    Yes. The system includes a belt clip in the package.
  • Can I change the language display on my cordless phone from English to Spanish?
    Yes you may change the language from English (default) to Spanish. To do this, follow the steps provided:
    1. Press [MENU] on the handset
    2. Press [#] [1] [1] [0]
    3. Press your [&#9650;] or your [▼] to select your desired setting
    4. Press [SAVE] then OFF
  • Can I change the font size on the screen on my phone?
    No. The font size is fixed and there is no option to change it on the handset.
  • Can I change the channel of my phone?
    The product operates in the frequency range of 1.92 GHz to 1.93 GHz. The frequency is fixed and the channel cannot be changed, the telephone goes thru the bandwidth automatically.
  • Can I change the backlight timer on my phone? It keeps on turning off the back light.
    No. The handsets are preset for backlight, it is not programmable. When the handset goes idle, it will turn off the backlight to save battery charge.
  • Can I block calls using my phone?
    Yes. Caller ID service is required to identify phone numbers to match what you have stored on the call block list. The unit is capable of blocking up to 250 phone numbers, if you have more than 250 numbers to block then subscribing to a call block service from you phone company is an option.
  • Can I access my answering machine while I am away from home?
    Yes. You can access the answering machine remotely by dialing your phone number on any touch tone phone to call it and as soon as you hear your greeting message play, enter your mailbox password or remote code and follow the voice prompt, as soon as you are done listening to your messages you can hang up.
  • Boost shows up on my handset. How do I get rid of it?
    The clarity booster is a feature that can improve sound clarity when the handset is used in an area where there may be interference. During an outside call, this feature is turned on automatically when necessary. When this feature is turned on, [BOOST] is displayed.
  • Are there any setup tips about the location of the main base unit in relation to range and audio quality?
    Yes. To optimize the range / audio quality, please be aware that metal objects / devices within proximity of the main base unit (less than a few feet), may block base cordless signal to reach the cordless handsets, resulting in deteriorated audio/poor sound quality:
    - Personal computer
    - Fax machine
    - External hard drive
    - Cash register
    - Metal tray for stationary
    - Metal file cabinet
    - Other metal materials
    If you experience distorted audio on the cordless handsets at extended distance/certain spots, please check for the presence of these metal objects/devices, clear them (relocate the main base unit, if necessary) and you should hear better audio afterwards.
  • Are the keypads to my handset supposed to be back lit?
    Yes. The supplied handset for this model has a keypad back light.
  • "Zzz" is displayed on my handset. How do I get rid of it.
    This icon refers to the 'Silent Mode' feature. Silent mode allows you to select a period of time during which the handset will not ring for outside calls. This feature is useful for time periods when you do not want to be disturbed, for example, while sleeping. Silent mode can be set for each handset. Before using this feature please set your date and time first. If you see this icon on the handset it means that the 'Silent Mode' feature is currently activated to disable feature follow these procedure:
    1. On the handset press [MENU] then press [#] [2] [3] [8]
    2. Select [OFF] then press [SAVE], press [OFF] to exit the setting.
  • I hear a series of beeps before my dial tone. Is this normal?
    If your dial tone is interrupted by several short gaps or beeps your phone company is indicating the arrival of a new voice mail message. It is the signal sent by your phone company to let you know that a message is waiting to be retrieved. If you are subscribed to a voice mail service from your provider this is normal. Please contact your phone company so you may know the procedure on hot to retrieve those message stores on your phone company's mailbox.
  • I have stored a number on my answering machine for message alert call, how do I turn it on?
    On the handset press [MENU] then the pound sign [#]. Press [3] [3] [8] Scroll to "On/Off" then press [SELECT]. Scroll to "On" then press [SAVE].
  • I have DSL service, will my phone be affected if I connect it on the same phone line?
    No. Digital Subscriber Line (DSL) is a service provided to connect over the internet transmitting over your local telephone line and is subsequently separated by filtering, so a DSL filter is recommended to eliminate noise on the background on your phone. Most DSL service providers would have the filters available for their subscribers, you may also check out your local electronic stores for availability. If you are not getting any service from your phone there is still a possibility of a phone line problem even if your DSL is working properly.
  • I can't hear a dial tone on my phone.
    Make sure that the base unit has power. Check if all cords are secure and plugged in properly from the wall and from the back of the base unit. Try to plug the unit to a known working jack then test again. If you have a different phone on the same line, and you are also not getting a dial tone, it is possibly a line problem. If that is the case, it is advised to contact your local phone company for further assistance.
  • I cannot operate the answering system.
    It is possible that:

    1. Someone is using the unit. Wait for the other user to finish and hang up.
    2. A caller is leaving a message. Wait for the caller to finish.
    3. The handset is too far from the base unit. Move closer to the main station.
  • I am trying to set up my phone and it says in the manual to press [OK], where is the button [OK] on my handset?
    The [OK] button is the middle soft key button. Soft keys are used in programming the phone system they are buttons that are not labeled on the Handset. They are located just below the screen on the handset and they function for whichever option is displayed on the screen.
  • I am experiencing Static and a humming noise in the background every-time I use my Panasonic phone. How do I fix it?
    If you are hearing static on your phone, reception breaks in and out or experiencing humming noise on the background while using your cordless phone, it might be caused by a transmission or electric interference, noise can also come from the phone lines, it would be best to locate the source of the interference first and a simple method of determining this would be to verify if static is heard on your other set of phones aside from the Panasonic. You can also try to relocate or plug the Panasonic phone to a different area where there is less interference. If you are subscribed to DSL service it is recommended to use a DSL filter, most DSL service providers would have the filters available for their subscribers, you may also check out your local electronic stores for availability.
  • How to add a Phonebook Entry?
    To add a phonebook item, follow these procedure:
    1. On the handset press the soft key for the Phonebook Icon then press [ADD]
    2. Enter the name by pressing the corresponding alphabet from the numbers on the handset keypad, press [OK]
    3. Dial the phone number of the contact then press [OK]
    4. Press the [&#9650;] or the [▼] button to select group then press [SELECT] twice on the handset.
  • How much radiation do these phones output?
    This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. RF transmission power is 115 mW (max.)
  • How many messages can be stored on my answering machine?
    The total recording capacity (including your greeting message) is about 18 minutes. A maximum of 64 messages can be recorded.
  • How many items can I store on my phonebook?
    The shared phonebook allows you to make calls without having to dial manually. Any handset registered to the base unit can use the shared phonebook. You can add 50 names and phone numbers to the shared phonebook, and assign each phonebook entry to the desired group.
    Only 1 person can access the shared phonebook at a time.
  • How many items can I store on my phonebook?
    The phonebook allows you to make calls without having to dial manually. You can add 100 names and phone numbers to the phonebook, and assign each phonebook entry to the desired group.
    Only 1 person can access the shared phonebook at a time.
  • How many handsets can be used with one main base unit?
    Up to a maximum of 6 cordless handsets can be used with one main base unit.
  • How many characters can I put on my phone book?
    Your phone can store up to 16 characters for the name and 24 digits for the number.
  • How far can the handset reach if I have the range extender?
    Although it is not possible to give the range in actual distance using the KX-TGA405 Range Extender, it will increase the distance you can use the handsets from the base. The status light must be lit Green.
  • How does the power back up operation work?
    When a power failure occurs, the charged handset temporarily supplies power to the base dunit (power back-up mode). This allows you to make and receive landline calls using a handset during a power failure. The base unit will not perform any other functions. However, some functions such as Caller ID and shared phonebook are available only when using a handset other than the handset supplying power to the base unit.
    Important:
    • If a handset is not placed on the base unit when a power failure occurs, "Base no power Press OFF" is displayed. After pressing OFF on the handset, place it on the base unit to start power back-up mode.
    • Power back-up mode will not work if the battery level of the power supplying handset is low
    • Do not lift the power supplying handset from the base unit during power back-up mode.
    • Do not touch the handset's charge contacts during power back-up mode.
    • If the battery level is low, the unit will not work sufficiently during power back-up mode.
  • How does phonebook sharing work?
    Phone book sharing occurs automatically between handsets. It is not necessary to manually copy entries in the phone book from one handset to the other. Also, a phone book entry deleted on one handset is deleted from the other handsets as well.
  • How do I use call waiting?
    To use call waiting, you must first subscribe to the call waiting service of your service provider/telephone company. If you already have the service activated on your phone line you will hear a few beeps during a call to place the first person on hold and answer the second party, press [FLASH] OR [CALL WAIT] button on the handset. The current call is then put on hold, and the other call is answered. You can press [FLASH] OR [CALL WAIT] button to go between the two calls as often as needed.
  • How do I unblock a number from my call block list?
    To unblock a number do the following procedure:
    1. On the handset press [MENU]
    2. Press [#] [2] [1] [7]
    3. Press the [&#9650;] or the [▼] to select your desired entry
    4. Press the softkey [ERASE], press [SELECT] on "Yes"
    5. Press [OFF] to exit the setting.
  • How do I turn on and off the call sharing feature on my handset?
    Call sharing is a feature which allows you to join an existing outside call on any extension handset registered to your base. You may choose to have this feature on or off and it needs to be set separately on each handset.
    1. On the handset press [MENU]
    2. Press the pound sign [#] [1] [9] [4]
    3. Select your preferred setting by highlighting [ON] or [OFF]
    4. Press [SAVE] then press OFF on the handset to exit.
    Click here for Help &amp; Tutorials
  • How do I turn on and off the auto talk feature on my handset?
    You can answer calls simply by lifting the handset off the base unit or charger. The auto talk feature will not work if the cordless handset is off the base or charger. You do not need to press [TALK]. To turn this feature on or off, follow these procedure:
    1. On the Handset press [MENU]
    2. Press the pound sign, [#] [2] [0] [0]
    3. Press [0] for off then press [SAVE] then OFF to exit operation.

    Feature needs to be set separately on each handset. Click here for Help &amp; Tutorials
  • How do I turn off the Talking Caller ID on my phone?
    To turn off Talking Caller ID at the base, press [MENU] [#] [*] [1] [6] [2], and press [&#9650;] or [▼] to turn the base Caller ID on or off. To turn off Talking Caller ID at one of the handsets, press [MENU] [#] [1] [6] [2], and press [▲] or [▼] to turn the handset Caller ID on or off. Note that the base and each handset are programmed individually.
  • How do I turn off the key tone on this handset?
    The default setting is on, if you wish to turn off the key tone follow these procedure:
    1. On the handset press [MENU]
    2. Press [#] [1] [6] [5].
    3. Press [1] for ON or [0] for OFF
    4. .
    5. Press [SAVE] to save your preferred setting then press [OFF] to exit.
  • How do I set up speed dial on my phone?
    You can assign 1 phone number to each of the dial keys (1 to 9) on the handset. Press and hold the desired speed dial number, choose from 0 to 9 then press [ADD], Scroll to "Manual" then press [SELECT]. Enter the party's name then press [OK] Dial the party's phone number then press [OK], press [SELECT].
    If you have a phonebook item which you want stored on your speed dial number then follow the same procedure as above but scroll down to "Phonebook" instead of "Manual" then scroll to the desired item then press [SAVE]
    Note: If you edit a phonebook entry which is assigned to a speed dial key, the edited entry does not transfer to the speed dial key.
  • How do I set the number of rings on my phone before my answering machine picks up?
    To adjust the ring count on your phone, press [MENU] on the handset and press [#] [2] [1] [1]. You will have a selection shown on the screen minimum of 2 rings and maximum of 7 rings. You can press your [&#9650;] or [▼] button to select your desired ring count then press [SAVE] then [OFF].
  • How do I set the date and time on my handset?
    Using the handset, press [MENU] [#] [1] [0] [1]. Enter the date in the order month, date, year using two digits for each, then press [OK]. Now enter the hour and minute using two digits for each; press [*] to select between AM and PM, then press [OK]
  • How do I send my phone in for repair?
    It is recommended to exhaust all troubleshooting steps before unit is sent for repair. If the procedure won't work and the telephone was purchased within a year, ship the unit to Panasonic Exchange Center address: 4900 George McVay Drive, Suite B No.12, McAllen, TX 78503. We recommend UPS. Carefully pack in a padded shipping carton and include all accessories. Include a letter detailing the complaint, a return address and provide a day time phone number where you can be reached. P.O. Boxes are not acceptable. Keep the tracking number for your records. A copy of valid registered receipt is required under the 1 year parts and labor Limited Warranty. Refurbished replacement is to be delivered within 7-10 business days.
  • How do I scroll thru the menu selection on this handset?
    You can scroll thru the menu selection by pressing the [&#9650;] or the [▼] button, it is the biggest button in the handset located in between the [TALK] and [OFF] button.
  • How do I retrieve the pre-recorded greeting?
    If you erase or do not record your own greeting message, the unit plays a pre-recorded greeting asking callers to leave a message. If you want to use a pre-recorded greeting message once you record your own greeting message, you need to erase your own greeting message. Do the following procedure:
    1. On the handset press [MENU]
    2. Press [#] [3] [0] [4]
    3. Press the soft key [YES]
    4. Press [OFF]
    . Click here for Help &amp; Tutorials
  • How do I retrieve erased messages?
    You can no longer retrieve deleted messages from the machine. Once you erase a message it gets deleted from the phone's memory.
  • How do I reset my phone?
    To reset the phone system, unplug the main base from the electrical outlet and remove the batteries for 5 seconds. Install the batteries and replug the base. Do not reset your phone unless necessary.
  • How do I record a greeting message?
    To record a greeting message or outgoing message, Press [MENU] [#] [3] [0] [2] and select [YES] on the handset, as soon as you hear a beep, start recording your message. To stop recording press [STOP] on the handset.
  • How do I properly charge my handsets?
    To ensure that the batteries charge properly, clean the charge contacts of the handset, base unit, and charger with a soft, dry cloth once a month. Clean more often if the unit is subject to the exposure of grease, dust, or high humidity. You may place the handset on its cradle after every use without damaging the batteries. Remember that the battery power is consumed whenever the handset is off the base unit or charger, even when the handset is not in use. Charge the battery(ies) provided only with the specified charger and for best performance, we recommend using the Panasonic rechargeable batteries.
    It is normal for the handset to feel warm during charging.
  • How do I know how many messages are recorded?
    The base unit for this model does not have a message counter feature. It would only announce the number of new messages during message play back from the base.
  • How do I install my brand new phone?
    After you open the box of your newly purchased phone, make sure you keep your receipt to validate the warranty of your phone. Check if all items and accessories that are supposed to be included in the box is complete, such as the batteries and the line cord etc. Follow these procedure to install and set-up he unit before use.
    1. READ the operating instructions Safety precautions before use.
    2. Use only the supplied Panasonic AC adaptor PNLV226, plug the tip at the main base unit and plug the adapter directly on a power outlet without any obstruction. Ensure that the AC outlet is installed near the product and is easily accessible.
    3. Use the supplied line cord and plug the cord at the back of the base securely, and the other end needs to be plugged in your telephone jack, make sure that the cord clicks when plugging the line cord on the base and the wall jack. You may now check if you can hear a dial tone when you lift the handset from the base.
    4. Remove the handset cover at the back of the cordless handset and insert the supplied rechargeable batteries inside. Confirm you install the batteries on its correct polarities, positive (+) and negative (-).
    5. USE ONLY Ni-MH batteries AAA (R03) size.
    6. Charge the new batteries by placing the cordless handset on the cradle. Initial charging needs to be 7 hours.

    After charging the handset, you may now start programming the handsets for your preferred settings.

  • How do I get rid of 'ECO' on my handset display?
    The intelligent Eco Mode reduces power automatically when the handset is close to the base unit to allow extended talk time. Battery life when using Talk button is about 13 hours when in Eco Mode. This is a feature of the phone that turns on automatically there is no procedure to disable it on the handset. ECO mode is turned off when the clarity booster is activated.
  • How do I forward calls from my phone to another number?
    This is a service that you can have your phone company activate on your line. The phone is compatible with this service as long as you have call forwarding subscription.
  • How do I erase my greeting message and use the pre-recorded or built-in greeting message?
    To erase your greeting message and use the default greeting message, press [MENU] [#] [3] [0] [4] on the handset and select [YES] then turn the handset OFF.
  • How do I edit my caller list?
    Once you call back an edited number, the handset which was used to call back remembers the area code and format of the edited number. The next time someone calls from the same area code, caller information is customized by the handset. For example, you can use this feature to set the handset to ignore the area code of callers in your area, so that you can call these local numbers using caller information without dialing the area code. To activate this feature, you must edit an entry in the caller list, then call that number. After that, phone numbers from that caller's area code are edited automatically. View your caller list then press the soft key [EDIT] repeatedly till the display shows your preferred telephone number format then press [CALL]
  • How do I deregister a handset which is no longer in use?
    To deregister a handset, perform the following steps:
    1. Press [MENU]&#8594;[#] [1] [3] [1] on the handset
    2. Enter [3] [3] [5][OK]
    3. Select the handset you want to cancel by pressing the desired handset(s) number
    4. Select [OK][▲]/[▼]: "YES" →[SELECT]
  • Will I damage the batteries by keeping the phone on the charger?
    No. The batteries that comes with your telephone do not suffer from the same memory effect that older batteries used to have. It is safe to keep the handset on the charger whenever it is not in use. Use only the Nickel Metal Hydride rechargeable batteries. Never use Alkaline or any other types as these could damage your handset.
  • Why does my handset display "Please lift up and try again"?
    You attempted to dial from the cordless handset while located in the charger. Lift the handset out of the charger and try again. If the same error message appears on the handset after lifting the handset from the cradle, reset the handset by removing the battery from the phone then re-install them again.
  • Why do I hear an echo on my handset?
    This is normal. When you first use your phone, there may be a slight echo because the microphone is being calibrated. This will occur again if the base is disconnected from the power outlet, or after a power outage. If echo continues for several days try to reset the handset by removing the batteries from the cordless handset for a few seconds.
  • Why do I hear a series of dial tones followed by a continuous dial tone after I lift the corded handset or press [TALK] on the cordless handset?
    If your dial tone is interrupted by several short gaps or beeps your phone company is indicating the arrival of a new voice mail message. It is the signal (sometimes called "voice mail tones" or "stutter tones") sent by your phone company to let users know that a message is waiting to be retrieved. If you are subscribed to a voice mail service from your provider this is normal. Please contact your phone company so you may know the procedure on hot to retrieve those message stores on your phone company's mailbox.
  • Why do I hear a series of beeps before my dial tone?
    If your dial tone is interrupted by several short gaps or beeps your phone company is indicating the arrival of a new voice mail message. It is the signal sent by your phone company to let users know that a message is waiting to be retrieved. If you are subscribed to a voice mail service from your provider this is normal.
  • Why am I not hearing my greeting message when my answering machine picks up?
    The answering machine is not designed to play the greeting message out loud when machine answers a call.
  • Which phone model series do not have the Time Adjustment feature?
    The following phone model series do not have the Time Adjustment feature: KXTG401x, KXTG402x, KXTG422x, KXTG427x, KXTG271x, KXTG272x.

    We recommend you contact your Phone Service Provider for a solution if you have one of the models mentioned above.
  • Where is the OK button?
    The handset features soft keys located right below the screen. By pressing a soft key, you can select the feature shown directly above it on the display. When you read the word [OK] on the handset, just press the corresponding soft key button below it.
  • Where can I order parts for my product?
    You can order parts and accessories for your machine from our Parts & Accessories Department at 1-800-833-9626.
  • Whenever I try to make a call my handset displays "Busy". How do I fix this?
    1. The called unit is in use.
    2. Other units are in use and the system is busy. Try again later.
    3. The handset you are using is too far from the base unit. Move closer and try again.
    4. There is no handset registered to the base unit matching the handset number you entered.
  • When I answer an incoming call, I have to say "hello" several times before the other party can hear me. How can I fix it?
    Make sure that the handset is not on "MUTE". If the problem still occurs, unplug the base unit from the power outlet for 5 seconds and remove the batteries from the handset then put everything back and test the telephone. If the procedure won't work and the telephone was purchased within a year, ship the unit to Panasonic Exchange Center address: 4900 George McVay Drive, Suite B No.12, McAllen, TX 78503. We recommend UPS. Carefully pack in a padded shipping carton and include all accessories. Include a letter detailing the complaint, a return address and provide a day time phone number where you can be reached. P.O. Boxes are not acceptable. Keep the tracking number for your records. A copy of valid registered receipt is required under the 1 year parts and labor Limited Warranty. Refurbished replacement is to be delivered within 7-10 business days. To submit a repair request online, click here
  • What should I do if my handset displays "No link to base. Reconnect AC adaptor."?
    Disconnect the AC adapter from the unit, wait for 5 seconds, then reconnect. The plug may have become loose over time or may not be fully inserted. If that does not work, try re-registering the handset.
  • What should I do if my base unit does not have power and there are no lights lit?
    If your base unit is not receiving power then you can try to have the base unit plugged on a different power outlet to test. If you have multiple handsets, you can try to use the AC adapter from one of the smaller chargers and have it plugged on the base. If you have followed the steps mentioned above and you base unit still does not have power, the base unit needs service. Please refer to your operating instructions warranty page for procedure.
  • What should I do if I can't return a call from the numbers I have on my caller ID and it keeps on giving an area code for local numbers?
    Check the phone number if it is on the correct format, if it shows an area code and you would want that edited, Press the [&#9668;] for CID select which phone number you want to edit by pressing [▲] or [▼] and press [EDIT] repeatedly until it shows the correct number then press TALK. Once you call back an edited number, the handset which was used to call back remembers the area code and format of the edited number. The next time someone calls from the same area code, caller information is customized by the Handset the way you programmed it.
  • What is the warranty of this telephone?
    This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. Coverage of warranty is applied to telephone products purchased within a year which starts with the date of original purchase. Please keep a copy of the valid receipt as a requirement for the warranty coverage.
  • What is the remote access code by default for accessing the answering machine remotely?
    The default code for accessing the answering machine remotely is "111". To program your own code, perform the following steps on handset or on base unit:
    1. Press [MENU][#] [3] [0] [6].
    2. Enter the desired 3-digit remote access code →[SAVE].

    Remote code can only be changed using the Panasonic phone it cannot be done remotely.

  • What is the Auto talk feature?
    Auto talk is a feature which lets you answer calls simply by lifting the handset off the base unit or charger. You do not need to press the [TALK]. The Auto talk feature will not work if the cordless handset is off the base or charger. Feature needs to be set separately on each handset.
  • What is the "tone equalizer" for?
    This feature maximizes clarity or accommodates hearing loss. This exclusive feature actually lets you control the bass, mid-range or treble tones in a caller's voice for maximum clarity.
  • What is my phone's voltage?
    Use only the supplied Panasonic AC adapter. The phone operates on 120V, 60 Hz.
  • What is FSK?
    Frequency Shift Keying or FSK is a signal used by service providers to alert you that you have a new voicemail message recorded on your assigned mailbox.
  • What is Eco Mode?
    The intelligent Eco Mode reduces power automatically when the handset is close to the base unit to allow extended talk time. Battery life when using Talk button is about 13 hours when in Eco Mode.
  • The screen on my handset is stuck? How do I fix this?
    Reset the handset by removing batteries for at least 5 seconds, then put them back.
  • The indicator light on the handset flashes slowly.
    The handset indicator light will flash for the following reasons:
    If the handset indicator light is flashing rapidly it means a call is being received.
    If a call is kept on hold for more than 9 minutes, an alarm tone starts to sound and the ringer indicator on the handset flashes rapidly as well.
    If the message indicator is flashing slowly, it means that there is a new message recorded on the built-in answering machine, once you listen to the message the indicator light should stop flashing.
    If 'New Voicemail' is displayed on the handset and the indicator flashes slowly, it means you have a new voicemail message, on your mailbox assigned to you by your phone company. If you are unaware of the voicemail subscription you may contact your phone company to get your voicemail PIN.
  • The date and time always changes even if I save the settings. What should I do to fix this?
    You have the "Time Adjustment" feature set to "Auto". This feature allows the unit to automatically adjust the date and time setting when caller information from your landline service is received. To use this feature, set the date and time first. To set this feature to "Manual" follow these procedure:
    1. On the handset press [MENU]
    2. Press [#] [2] [2] [6]
    3. Press [2] for manual
    4. Press [SAVE] then press [OFF] to exit the setting
  • My telephone says 'Check Tel Line' and I cannot call out. What will I do to fix this?
    The supplied telephone line cord has not been connected yet or not connected properly. Check the connections by making sure the line cord is secure. When you plug the phone line cord at the back of the phone make sure you hear it click. You can also try to have the telephone plugged on a different phone jack inside the house, if there is none, try to take it to a neighbor or friends house to be tested, to be sure you are not having a line problem.
  • My handset says "line in use". How do I clear it?
    Make sure that the base unit has power. "Line in use" is displayed if the line is currently active on a call. If you have multiple handsets, it is possible that one of them is turned on so check the rest of the handset and turn it off.
    Check if all connections are secure and plugged properly from the wall and from the back of the base unit. If none of the handsets are in use, try to unplug the base unit from the power outlet for 5 seconds then replug and test the line by calling you line using your cell phone or a different phone line.
  • My handset displays, "Please lift up and try again".
    You attempted to dial from the cordless handset while located in the charger. Lift the handset out of the charger and try again. If the same error message appears on the handset after lifting the handset from the cradle, reset the handset by removing the battery from the phone then re-install them again.
  • My handset displays, "Insert battery" What does this mean and how do I clear this error from my display?
    A wrong type of battery such as Alkaline or Manganese was inserted. Use only the Nickel Metal Hydride rechargeable batteries. Never use Alkaline or any other types as these could damage your handset.
  • My handset displays 'Line in use' and I cannot receive incoming calls. What does this mean and how do I clear this error from my handset?
    Someone might be using the line. If you have multiple handsets, please check all of your cordless phones if they were properly hung up. If you have already done this, and the error 'Line in use' is still appearing on the phone, check if your other phone is getting a dial tone. If the problem seems to be happening with all of your phones, then you might be experiencing a possible line problem, you can try to plug the telephone on a totally different line like your neighbor's or friend's house.
    If the problem is only happening with the Panasonic phone follow these procedure:
    1. Unplug your Panasonic phone both from the phone jack.
    2. Try relocating the telephone on a different phone jack inside the house.
    3. Try using a different line cord if you have any other available.
    4. If steps above still doesn't work, telephone might need service, please refer to your instructions warranty page for procedure.
  • My handset displays "missed call." How do I clear it?
    If a call is not answered, the unit treats it as a missed call. The display shows "Missed call". This lets you know if you should view the caller list to see who called while you were away. You can replace the handset on the base or the charger or by pressing and holding the [OFF] button on the base.
  • My caller ID information is displayed late.
    Disconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit does not work properly, contact an authorized service center.

    CAUTION: To avoid permanent damage, do not use a microwave oven to speed up the drying process.
  • My caller ID information is displayed late.
    Depending on your service provider or telephone company, the unit may display or announce the caller's information at the second ring or later. Move closer to the base unit.
  • My answering machine says "memory full" and it no longer records messages. What can I do about this?
    The error message indicates that the answering machine's maximum recording time was reached. You need to erase messages from your answering machine for it to start recording new messages again.
  • Missed calls are appearing on my screen. Why?
    If a call is not answered on a specific handset, the unit treats it as a missed call. The display shows "Missed call". This lets you know if you should view the caller list to see who called while you were away.
    Note: Even when there are unviewed missed calls, "Missed call" disappears from the standby display if the following operation is performed by one of the units:
    1. A handset is replaced on the base unit or charger.
    2. Pressing OFF on a handset.
    3. View your caller list.
  • Messages are announced out loud, how do I turn off call screening?
    The call screening feature allows you to monitor a message from the base and the handset's speaker when the answering system is recording a message. The default setting is "On". To turn this feature off, follow these procedures:
    1. You can either use the base or the handset. Press [MENU] [#] [3] [1] [0]
    2. Use your [&#9650;] or your [▼] to select "Off"
    3. Press [SAVE]
  • Is this phone hearing aid compatible?
    Yes. The phone system passes the FCC requirement no. 68 and it also complies to the "TIA-1083" standard. Phone has have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants.
  • Is there a message indicator on this phone? Will it light up when there is a new voice mail message?
    Yes. Each of the handset included in the package has a message alert indicator. "New Voice Mail" will be displayed on the handset and the message indicator light flashes slowly on the handset when you receive a voicemail message from your provider.
  • If I buy two bases attached to the same phone number, will I be able to call one base (or its handsets) with the other?
    No. Only intercom calling among handsets registered to the same base are possible.
  • I want to talk to 2 external numbers on my one line phone. What is "three way calling" and how do I perform this?
    A Three way call is a phone call in which the person who is calling wishes to talk to two other parties. It is a service offered by phone companies which allows you to call a party and by pressing the [Flash] button it allows you to receive another dial tone to call another phone number. Pressing [Flash] again will join all three parties together.
  • I took the batteries out of the handset just for a second and when I put them back in, the low battery icon flashes and the screen displays "charge for 7h". Is this normal?
    This is normal. When the batteries are taken out, the handset loses track of how much the batteries are charged. You may use the phone normally, but the battery indication will not be accurate until charged for about 7 hours.
SEE ALL FAQ'S