Images http://i1.adis.ws/i/pcec/KX-HN0001W_ALT01?$PDP-Hero-Image-Desktop$
overview

DIY Complete Home Monitoring System

Details
KX-HN0001W
Features
  • Includes 2 Indoor Cameras, 2 Outdoor Cameras, 2 Motion Sensors, 5 Door/Window Sensors, 1 Smart Plug and Hub Unit
  • Monitor outdoor areas -- entrances, driveway, yard
  • Monitor indoor areas -- entrances, living spaces, basement, garage
  • Motion Sensor - Detects motion in interior rooms and spaces
  • Door/Window sensor - Detects if window or door is open
  • Smart Plug - Automatically turns on/off lamps and electronics
  • Receive alerts, arm/disarm via smartphone/tablet
  • One-touch syncing with your WiFi router and smartphone/tablet

SpecificationsExpand All

  • MORE DETAILS
    • KX-HNB600
    • FUNCTION
    • Frequency Range
    • SD Card Slot for Recording Video
    • Status Indication
    • Easy Setup
    • Expandability
    • Phone Features
    • Sensor Detect Notification (Window Sensor/Motion sensor/Motion sensor in Camera)
    • Alert Tone Volume Steps
    • Wall Mountable
    • Operating Conditions
    • DIMENSIONS/WEIGHT
    • Dimensions (W x H x D in)
    • Weight (lb)
    • KX-HNC600
    • FUNCTION
    • Camera Angle
    • Video Compression
    • Image Sensor
    • Max Frame Rate (resolution)
    • Recording Time
    • Night Vision
    • Sensor
    • Waterproof
    • Speaker/Microphone
    • Status Indication
    • Easy Setup
    • Wall Mountable
    • Power Source
    • Operating Conditions
    • DIMENSIONS/WEIGHT
    • Dimensions (W x H x D in)
    • Weight (lb)
    • KX-HNC200
    • FUNCTION
    • Camera Angle
    • Video Compression
    • Image Sensor
    • Max Frame Rate (resolution)
    • Recording Time
    • Night Vision
    • Sensor
    • Waterproof
    • Speaker/Microphone
    • Status Indication
    • Easy Setup
    • Wall Mountable
    • Power Source
    • Operating Conditions
    • DIMENSIONS/WEIGHT
    • Dimensions (W x H x D in)
    • Weight (lb)
    • KX-HNS101
    • FUNCTION
    • Sensor Sensitivity Select Switch
    • Status Indication
    • Easy Setup
    • Power Source
    • Battery Life
    • Sensor Detection Method
    • Wall Mountable
    • Operating Conditions
    • DIMENSIONS/WEIGHT
    • Dimensions (W x H x D in)
    • Weight (lb)
    • KX-HNS102
    • FUNCTION
    • Sensor Sensitivity Select Switch
    • Status Indication
    • Easy Setup
    • Power Source
    • Battery Life
    • Sensor Detection Method
    • Wall Mountable
    • Operating Conditions
    • DIMENSIONS/WEIGHT
    • Dimensions (W x H x D in)
    • Weight (lb)
    • KX-HNA101
    • FUNCTION
    • Max Wattage
    • Status Indication
    • Easy Setup/Operation
    • Power Source
    • Power Consumption
    • Operating Conditions
    • DIMENSIONS/WEIGHT
    • Dimensions (W x H x D in)
    • Weight (lb)
    • UPC
LOAD MORE

Reviews

Support

FAQs
  • How can I update the software of the Hub?
    When software update is available you will automatically receive a software update notice to your mobile device. Once accepted the Hub will download the new software through your home Wi-Fi network and update itself. Software update of the Hub will take about 16 minutes to complete. During the update do not unplug the Hub or turn off your mobile device.
  • Why do I get the following error from my Home Monitoring System: Troubleshooting Connection Unsuccessful: Network Signal Error (Weak Signal using 3G, 4G, LTE or Wi-Fi)?
    This is caused by a weak signal with your mobile device.

    1. Make sure you can connect to the internet using your mobile device.

    2. Move to an area where there is a strong signal.

    3. Try changing from mobile data (3G, 4G, LTE) to Wi-Fi.

    4. For iOS user verify if the iPhone or iPad allows mobile data transmission for the app. To check this, Tap "Settings" of the device and tap "Cellular" & scroll down to "USE CELLULAR DATA FOR:" the "Home Network" app should have green toggle switched to On.
  • How do I reset the hub and re-start the initial setup?
    1) Disconnect the AC adaptor from the hub.
    2) While pressing the Wi-Fi SETUP button on the rear of the hub and the CAMERA and OTHER DEVICE buttons on the side of the hub (total 3 buttons), connect the AC adaptor to the hub. Do not release the buttons yet.
    3) Continue to hold the buttons down until the hub's LED indicator lights in yellow, then release the buttons.
    4) Wait for the hub's LED indicator to light in green (about 2 minutes).
    5) Press and hold the Wi-Fi SETUP button until the hub's LED indicator blinks in green.
    6) Wait for the hub's LED indicator to light in red.
    (The hub has been successfully reset.)
    7) Disconnect the AC adaptor from the hub and then connect it again to restart the hub.
  • Can I access the system using a computer?
    No. The system can be accessed using the APP on your mobile devices.
LOAD MORE FAQs
Additional Documents
CONTACT INFORMATION
Consumer Product Support and Technical Assistance
Operating hours:
Mon-Fri 9am-5pm EST
Panasonic USA