Wireless Network...

Features Wireless Type Network Camera
・Wireless system based on IEEE 802.11b
・Remote Pan/Tilt operation
・Easy Installation, Easy Monitoring
・Multi-Camera screen
・External I/O
・Saving image
・"Transfer in the Alarm mode", "Transfer in the Timer mode"
・Viewnetcam.com compatible. (FREE DDNS Service)
・Viewing still images on your mobile phone


See There When You Can't Be There 153;
These cameras can be viewed and controlled from a standard Web browser, video display, or even a compatible cell phone or PDA1. Place them in your home, office, vacation home or almost anywhere else that you'd like to keep an eye on things, with no PC required on location! They are easy to install and operate and require no additional software for the PC that you're viewing them on. Each camera also comes with a free Web address, which can track the camera automatically. All you need is a regular Web browser to view them on your PC, as all of the other required software, including control software (TCP/UDP) and e-mail software (SMTP), is already inside the camera.

802.11b Wireless Communication & Ethernet Connection - No PC Required
This camera can communicate wirelessly with standard 802.11b wireless devices, allowing the flexibility to install and operate the camera without running network wires. Plus, utilizing SSID filtering and powerful 40/64/128-bit WEP encryption helps to protect your wireless network from illegal intrusion. Since the camera is attached through an Ethernet connection (or router) and power source, you don't need a computer at each location you want monitored. Each camera has a built-in web server with IP address. To view the images on a PC, simply open a graphics-capable Web browser and type in the cameras specified, password optional Internet address.

Control the Camera Remotely
Using a standard Web browser, video display, or even a compatible cell phone or PDA, you can control the movement of the camera. There is 120 186; of Pan (left & right) movement and 90 186; of Tilt (up & down) movement available. You can also assign a "Home Position" that allows you to return the camera to a pre-designated shooting position. Up to eight shooting positions can be registered in advance, so you can aim the camera exactly where you want it. You can also click on the part of the image you want to see, and automatically bring that part to the center of the screen.

Record Only What You Want to Record
The camera can be set to automatically record video at certain times and certain speeds. In addition, with optional, external sensors attached to the camera, it is possible for the camera to email2 or record when triggered by motion, sound, light, timer, or even a push button. These convenient functions eliminate your need to constantly check the image.

Create Your Own Free Web Address
The FREE viewnetcam.com service allows you to create a personal Web address (e.g., http://bob.viewnetcam.com) at which your camera's live image can be found on the Internet. Access your Panasonic Network Camera live from virtually any Internet connection point around the world! Your Web browser is the only software you'll need. Here's how the camera and service works: special software embedded within your Panasonic Network Camera gives your camera the ability to locate your unique Internet address. No matter what kind of Internet connection you have or which Internet provider you use, the viewnetcam.com service will keep your camera's Internet address permanent.

Sensor Recording and Email Alerts
With the built-in heat sensor, the camera can be set to record and/or notify you by email when someone enters the room. It can even automatically move to a preset location when triggered, just in case someone was viewing a different part of the room.

  1. Connecting the camera to the Internet requires Internet access and may require that you obtain additional hardware such as a cable or DSL modem, or a hub or router with a 10Base-T Ethernet connection. The camera will not be accessible from across the Internet unless the Internet connection is active. We cannot guarantee that your Internet connection will always be available. The frame rate of the motion image may be dependent upon the uplink speed of the Internet connection and other factors. Viewing may involve some time delay. Recommended minimum 100kbps upstream bandwidth for camera.
  2. Email transmission may not be possible in some cases due to the mail server authentication system (SMTP authentication, etc.) used by your Internet service provider.

SpecificationsExpand All

    • Color Video
    • Image Compression
    • Video Streaming Format
    • Quality Video Resolution
    • Frame Rate
    • Authentication
    • Encryption
    • IPv4/v6
    • Supported Network Protocols
    • Upgrades
    • Automatic Network Configuration
    • Simultaneous Viewers
    • Image Buffer
    • Pre-Alarm Image Buffer
    • Image Transfer via E-Mail (SMTP) or FTP
    • Camera Recording
    • Max. Bandwidth Control
    • Free DDNS Compatible (Viewnetcam.com)
    • Cellular Phone Compatibility
    • Multiple Camera Views
    • Multi-Language Interface
    • Built-in Calendar Timer
    • Auto Time Adjustment with NTP
    • Time & Day Access Control
    • Remote External Output Control
    • LED Indicator Control
    • Configurable Top Page
    • Zoom
    • Image Sensor
    • Viewing Angle
    • Remote Pan Angle
    • Remote Tilt Angle
    • Maximum Pan/Tilt Speed
    • Hide-Away Lens
    • Preset Locations
    • Click to Center
    • Focus
    • Aperture
    • Illumination
    • White Balance
    • Adjustments
    • Exposure
    • Magnification
    • Clear Dome Lens Cover
    • 2-Way Audio
    • CODEC
    • Frequency Range
    • Input
    • Output
    • Wireless Technology
    • Frequency
    • Number of Channels
    • Transmission Speed
    • Security
    • Network Connection
    • External I/O Connector
    • SD Card Slot for Image Buffer
    • Analog Video Output
    • Speaker/Microphone Jack
    • Weatherproof (splash resistant)
    • Built-in Sensor
    • Multiple Mounting Options
    • Operating Temperature
    • Operating Humidity
    • Power Source
    • Power Consumption
    • Included Accessories
    • Operating System Requirements
    • Web Browser requirements
    • UPC



Firmware & Drivers FIRMWARE
  • What support content is available for my product?

    Click on a link below that interests you the most:

    • Panasonic Community - Join our Community and participate in Discussions where you can learn more about our Products. You will also be able to get advice from other members and Product Experts, as well as documents, FAQ’s, tutorials, and updates.

    • Live Chat - Chat with a representative from 9am-9pm Monday-Friday and 10am-7pm Saturday/Sunday EST.

    • Email Contact - For email inquiries, send them to panasonicwebcasesf@us.panasonic.com, you will receive a response within 24-48 hours.

    • Parts/Accessories - Order parts and/or accessories from our supply chain, Encompass.

    • Service Locator - Locate the closest Authorized repair center to you for TVs, Microwaves, Vacuums, or Massage Chairs.

    • Service Request - If you need a product repaired and is NOT a TV, Microwave, Vacuum, or Massage Chair, you can use our Online Repair Request. There, you will be able to get a repair estimate, pay online, and track the repair status.
Operating hours:
Mon-Fri 9am-9pm EST
Sat-Sun 10am-7pm EST

You May Also Like

Panasonic USA