15.6V Impact Driver


15.6V Impact Driver with 1/2" Square Drive with Ball Detent


The Panasonic Cordless Power Tool Difference
To meet the needs of professional tradesmen around the globe, all Panasonic Cordless Power Tools are carefully constructed based on four primary principles: cordless capability, power, lightweight, and ergonomic design. Since our tools are all cordless, they can be used almost anywhere the professional requires. Our inverter charger technology used in our Ni-MH battery charging system allows for long battery pack life and quick re-charging time. Plus, there's no compromise in power-our tools provide more than enough punch using motors with high-power magnets, heat resistant brushes and built-in cooling fans. For your comfort, the advanced ergonomic design of our tools means they're compact, well-balanced and easy to operate for extended periods of time without fatigue. Successfully combining technology with durability, these lightweight tools are full of helpful features and provide reliable solutions that tradesmen can utilize for all their construction needs.

This multi drill & Driver does it all-drilling, driving and fastening. The ½-inch square impact socket fits all ½-inch sockets. The ¼-inch hex quick connect chuck can be used with all ¼-inch quick-change holders for drilling and driving. Snap on the ½-inch keyless chuck for use in the drill mode for effortless drilling of 1-inch holes in treated lumber or telephone poles. It sinks lag bolts or long deck screws with minimum twist resistance on your hand and arm and sets steel or concrete anchors in short order.

Ideal for General Construction, Plumbing, Carpentry and Electric Installation Work
This powerful drill driver delivers full torque at any speed, so full force can be applied while still maintaining control. With an 18-stage clutch plus drill position, 1/4" hex quick connect chuck, variable speed control, impact and driver modes, electric brake and a quick-charging system, this high-quality tool is ideal for general construction, plumbing, electrical installation work and finish carpentry.

Less Time Spent Waiting and More Time Spent Working
The 3.5Ah Ni-MH battery can be fully charged in 55 minutes1 (using the EY0110B charger), which means less time spent waiting and more time spent working. Even when there isn't time for a full charge, the inverter charger features a 5-minute "Emergency Charge" that charges the pack to 15% of its capacity.

  1. Charging times are approximate and may be slightly longer depending on conditions.

SpecificationsExpand All

    • Compact Size
    • Lightweight
    • High Power
    • Battery
    • Extra battery
    • Charging System
    • Speeds
    • Clutch
    • Chuck
    • Reversible
    • Electric Brake
    • Ergonomics
    • Acceptable Battery Packs
    • Typical Applications
    • Carrying Case
    • Dimensions (H x W x D)
    • Weight


EY6535GQWA is rated 4.2 out of 5 by 5045.
Rated 5 out of 5 by from one of the best tools a man could own. I use it every day and it still works every bit as hard as new it is 11 yrs and I keep telling myself to get a new one before it dies. That hasnt happened.
Date published: 2011-02-18
Rated 5 out of 5 by from panasonic is the best I have owned this drill driver for over ten years and it is still going! the same two batteies, I use it at my job everyday.
Date published: 2010-11-25
Rated 5 out of 5 by from Excellent All Around I have owned this drill driver for about 6 years. It is built like a tank. Battery life is excellent, and I would compare its 15v battery to any other manufacturers 18V unit. The charger works fast. The drive shaft is a standard 1/2" drive that will allow you to use your 1/2" sockets. I use it to quickly remove lug nuts on my car, although it is not powerful enough for something that needs more than 80ft lbs of torque, regardless of what the specs say (120 ft lbs). It will sink 3.5" screws into pressure treated lumber in either impact mode or regular drill mode without breaking a sweat. I love the impact mode to break free rusted screws and nuts, works much better than using a screwdriver or drill driver. A friend of mine is a professional carpenter and uses his unit every day for years and has found his to be bulletproof as well. It is bigger and heavier than most of the new generation of 'pistol' sized impact drivers, but this panasonic makes those look like toys. This is the only cordless drill or driver that I own...if you are looking for one and do not want to buy 2 tools, this is the ticket. I almost never use my corded drill anymore, as this model is almost as powerful as a 3/8" 120V corded drill.
Date published: 2010-06-25
Rated 5 out of 5 by from Outstanding All Purpose Driver The EY6535GQW is the drill/driver of choice if you only want to tote around one of this type of tool. It performs a variety of drilling and driving functions with ease and the impact function is very handy to have. Typical Panasonic quality and reliability. Not an inexpensive tool, but worth it.
Date published: 2009-08-12
  • y_2016, m_11, d_24, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_415, tr_4630
  • loc_en_US, sid_EY6535GQWA, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=AGE, direction=DESCENDING)]
  • clientName_panasonic


Owner's Manuals
  • What support content is available for my product?

    Click on a link below that interests you the most:

    • Panasonic Community - Join our Community and participate in Discussions where you can learn more about our Products. You will also be able to get advice from other members and Product Experts, as well as documents, FAQ’s, tutorials, and updates.

    • Live Chat - Chat with a representative from 9am-9pm Monday-Friday and 10am-7pm Saturday/Sunday EST.

    • Email Contact - For email inquiries, send them to, you will receive a response within 24-48 hours.

    • Parts/Accessories - Order parts and/or accessories from our supply chain, Encompass.

    • Service Locator - Locate the closest Authorized repair center to you for TVs, Microwaves, Vacuums, or Massage Chairs.

    • Service Request - If you need a product repaired and is NOT a TV, Microwave, Vacuum, or Massage Chair, you can use our Online Repair Request. There, you will be able to get a repair estimate, pay online, and track the repair status.
Consumer Product Support and Technical Assistance
Operating hours:
Mon-Fri 9am-9pm EST
Sat-Sun 10am-7pm EST
Panasonic USA