DMP-B200 Portable Blu-ray Disc™ Player
- 8.9" SVGA Articulating LCD Screen
- HDMI Output
- 4H Battery Life
- BD-ROM Playback BD-Video
- BD-RE / BD-RE DL Version 3, JPEG
- DVD Playback DVD-Video
DVD-R/-RW/-R(DL)Playback DVD Video DVD-VR
MP3/JPEG (DVD-R/ DVD-R DL)
MKV (DVD-R/ DVD-R DL)
+R/+R(DL)/+RWPlayback Video, AVCHD
CD-R/-RWPlayback CD-DA, MP3, JPEG, MKV
- CD CD-DA
- LCD Monitor (Widescreen) 8.9" (WSVGA)
Playback Timesapprox. 4H (with battery pack)
- Rechargeable Battery Yes
- P4HD (Pixel Precision Progressive Processing for HD) Yes
- Digital Noise Reduction Yes
Dolby® Digital Plus/ Dolby® TrueHD
Decode (2ch) and Bitstream output
- Built-in Speaker Yes
- Dialog Enhancer Yes
DTS™-HD Master Audio Essential/ DTS™-HD High Resolution Audio
Decode (2ch) and
- Audio D/A Converter 192kHz/24bit
VIERA Link™ (HDAVI Control 5)Yes
- Car DC Adaptor Yes
- HDMI (Output) Yes
- Headphone Out Yes
- in Standby Mode 0.3W
- in Quick Start Mode 4W
- Playback JPEG / MPO Yes
- Playback MPEG2 / AVCHD Yes
- Video System NTSC
- Power Supply AC 110-240V, 50/60Hz
- Dimensions (W x H x D excluding the projecting parts) [Approx.] 9.37 x 2.06 x 7.41inch
- Weight (including battery, Approx.) 48.52oz
- OFF Timer Yes (30min/1h/2h/3h/6h/12h)
- Compatible Media SD Memory Card, SDHC Memory Card, SDXC Memory Card.
- UPC 885170029231
What do I do in the unit has no power?If the unit is not powering on, remove the power cord plug from any power strip it may be connected to and plug directly into the wall outlet.
What should I do if my Blu-ray player freezes or locks-up?If your Blu-ray player is not responding then do as follows:
1. Unplug all cables and USB devices from the player.
2. Unplug the power, wait about 30 seconds then reconnect.
We recommend connecting the player (wired) to your network and attempt updating its Firmware again.
Why is a "No Read" error message appearing on my players display?
Ensure that the surface of the disc is not dirty, scratched or smudged, or try another disc and see what happens. If the product is unable to play all discs, then it will require servicing.
If you elect to have your Blu-ray Player, DVD Recorder or Home Theater System serviced, please contact Panasonic via email before sending your unit in at email@example.com. Be sure and provide the model number of your player and a description of what is wrong with the unit. This condition is usually a repair issue and depending on the units age it may or may not be possible due to parts availability.Click here to submit a repair request. Be sure to have your model number directly from your device and include any hyphens or suffixes ex. DMC-G1A.
If you decide to have your player serviced:
Ship your product to:
Panasonic Factory Service Center
4900 George McVay Drive
Suite B; Door-12
McAllen, TX 78503
Please include your name, address, telephone number, email address, copy of your purchase receipt (for warranty service), and a description of what is wrong with the unit. Freight collect shipments will not be accepted.
Panasonic is not responsible for damage that occurs in transit. All contents should be packaged for safe travel to the service center. Customer should use a reputable small package shipping company that is able to provide a package tracking number and insurance (if customer should so desire to insure their package).
Units that are abused, damaged, infested with insects, have corrosion, etc. will be placed out-of-warranty.
Once your unit arrives at the facility, you may contact us for status at:
Please reference your Service Job number when contacting. You will be contacted if there is any cost you are responsible for.
Why does the message, "SET1", "SET2" or "SET3", display on the player when I press a button on the remote control?The remote control and main unit are using different codes. On the remote control, press and hold [OPTION] and the following button at the same time for more than 5 seconds depending on the indication SET 1: [G], SET 2: [B], SET 3: [Y].
On the remote control, press and hold [OK] and the corresponding number ,  or  for "SET 1", "SET 2" or "SET 3" respectively.