overview
20" Diagonal Combination TV/DVD Player
Details
http://shop.panasonic.com/support-only/CT-20DC50.html
CT-20DC50
Features
20" Diagonal Combination TV/DVD Player
SpecificationsExpand All
-
MORE DETAILS
- All Channel Auto Set No
- Built-in DVD Video/Video CD/CD Player No
-
FM Radio w/Auto Scan No -
Ready to Play No - MP3/CD/CD-R/CD-RW Playback No
- Optical Output for dts® & Dolby Digital ® Decoders No
-
2-Line Digital Comb Filter No - DVD Multi-Speed Scan/Slow No
- DVD Picture Zoom No
-
Multiple DVD Viewing Options No - DVD Resume Play, Skip Forward/Reverse No
-
Alarm Clock No - Front A/V, S-Video and Earphone Jacks No
- Stereo MTS/SAP Reception No
- Simulated Surround Sound No
-
Auto Clock Set with 24-Hour backup No - 25" Diagonal Screen Size No
- Panablack Picture Tube No
- PureFlat Picture Tube No
- 3-Line Digital Comb Filter Yes
-
V-Chip Parental Guidance System No - Auto Power Off No
- 27" Diagonal Screen Size No
- PanaBlack Picture Tube Yes
- 1-bit Video D/A Converter Yes
- Auto Switching Field Yes
- Frame Still Yes
- Fine Pitch Picture Tube Yes
- Horizontal Edge Correction Yes
- Stereo Sap/dbx/Noise Reduction Yes
- 96 kHz/24-bit Audio D/A Converter Yes
- Artificial Intelligence Sound Control Yes
- Bass/Tremble/Balance Controls Yes
- 3 Sets of A/V Input Jacks (1 front/2 rear) Yes
- S-Video Input Jack Yes
- Stereo Headphone Jack Yes
- Digital Output for DTS® and Dolby Digital® Surround Sound Yes
- Fixed & Variable Audio Output Yes
- Lighted Universal Remote Control Included
- Virtual Surround Sound Yes
Reviews
Support
Owner's Manuals
Warranty
FAQs
-
What should I do if my TV will not turn on and the power indicator LED is not flashing?Follow these troubleshooting steps:
- Make sure your TV's power cord is plugged into an electrical outlet.
- Make sure the electrical outlet the TV is plugged into has power by testing known working device in that outlet.
- After verifying the TV is plugged into a working outlet, try pressing the [POWER] button on the TV instead of the TV remote.
-
What should I do if the front Power indicator LED light is blinking?1. Unplug the TV's power cord.
2. Unplug all cables.
3. Power the TV using a different power outlet (do not use a power strip or surge protector).
If the problem persists, consider having the TV serviced. Click here for Panasonic Service Locator.
Note: Count how many times the LED light blinks. This can help a technician troubleshoot the problem. -
What should I do if I get audio but no picture from an external device connected to my TV?
- Try unplugging the cable between the TV and the external device and reconnecting it firmly on both sides.
- Try unplugging the power cord of the external device for 30 seconds.
- Try connecting another external device to the same input using the same cable.
- If the picture returns on the second device, you may need to contact the manufacturer of the first external device you had connected for further troubleshooting.
- Try using a different cable between your device and the TV using the same input of your TV. If you get a picture and audio, you may need to replace your cable.
- Try another input of the TV to verify if there is an issue with the TV input the external device was connected to.
-
What should I do if I have bars displaying on the TV screen?Change the format (aspect ratio) of the picture by pressing the [FORMAT] or [ASPECT] button on the TV's remote control. If you still have bars, check the aspect settings on your external video source, such as Cable/Satellite box, DVD/Blu-ray Disc player, etc. Note: Some content, such as film-based movies, are available in extra-wide format. Top and bottom bars are unavoidable.
CONTACT INFORMATION
Consumer Product Support and Technical Assistance
Operating hours:
Mon-Fri 9am-5pm EST