Images http://i1.adis.ws/i/pcec/BB-HCM403A_ALT01?$PDP-Hero-Image-Desktop$
overview

PoE Dome Network Camera

Details
BB-HCM403A
Features Network Camera
・Tilt 10x Digital Zoom
・Audio 2-Way Communication
・SD Memory Card Recording
・AC Adaptor/PoE

Features

See There When You Can't Be There™


These cameras can be viewed and controlled from a standard Web browser, video display, or even a compatible cell phone or PDA1. Place them in your home, office, vacation home or almost anywhere else that you'd like to keep an eye on things, with no PC required on location! They are easy to install and operate and require no additional software for the PC that you're viewing them on. Each camera also comes with a free Web address, which can track the camera automatically. All you need is a regular Web browser to view them on your PC, as all of the other required software, including control software (TCP/UDP) and e-mail software (SMTP), is already inside the camera.



Bring Any Image Right Up Close


Equipped with a 10x zoom2 function, the camera lets you zoom in and out in a total of 10 steps to view objects that are close or far away. You can feel more secure because the zoom function gives a clear view of objects that would be difficult to see with ordinary monitoring, like the face of a visitor walking through the door or the detailed conditions at the back of a large factory.



Two-Way Voice Communication


An external microphone and amp-equipped speaker, both optional, enable two-way voice communication3 (transceiver system) between the network camera and a PC used to monitor the camera image. In addition to conventional monitoring of images and sound, voice messages can be transmitted from the PC to the network camera. Voice transmission and reception can be switched easily from the PC used to monitor the image.



CCD Sensor for Enhanced Image Expression


This camera features a CCD (Charged Couple Device) for sharp, enhanced image expression. The image refreshing speed (maximum) has been increased to 30 images per second4 for smoother displays of moving images.



Record Directly onto SD Cards


The BB-HCM403 features an SD Memory Card slot for recording images captured by the network camera directly onto an SD Memory Card (sold separately).
     * Voices cannot be recorded.



Simple Ethernet Connection - No PC Required


Our cameras are attached through an Ethernet connection (or router) and power source, you don't need a computer at each location you want monitored. Each camera has a built-in Web server with IP address. To view the camera's images on a PC, simply open a graphics-capable Web browser and type in the cameras specified Internet address(password optional).



Control the Camera Remotely


Using a standard Web browser, video display, or even a compatible cell phone or PDA, you can control the vertical (tilt) movement of the camera. There is 40 186; of Tilt (up & down) movement available, as well as a 106 186; (53 186; off center L/R) fixed horizontal viewing angle. You can also assign a "Home Position" that allows you to return the camera to a pre-designated shooting position. Up to eight shooting positions can be registered in advance, so you can aim the camera exactly where you want it. You can also click on the part of the image you want to see, and automatically bring that part to the center of the screen.



Record Only What You Want to Record


The camera can be set to automatically record video at certain times and certain speeds. In addition, with optional, external sensors attached to the camera, it is possible for the camera to email5 or record when triggered by motion, sound, light, timer, or even a push button. These convenient functions eliminate your need to constantly check the image.



Create Your Own Free Web Address


The FREE viewnetcam.com service allows you to create a personal Web address (e.g., http://bob.viewnetcam.com) at which your camera's live image can be found on the Internet. Access your Panasonic Network Camera live from virtually any Internet connection point around the world! Your Web browser is the only software you'll need. Here's how the camera and service works: special software embedded within your Panasonic Network Camera gives your camera the ability to locate your unique Internet address. No matter what kind of Internet connection you have or which Internet provider you use, the viewnetcam.com service will keep your camera's Internet address permanent.

  1. Connecting the camera to the Internet requires Internet access and may require that you obtain additional hardware such as a cable or DSL modem, or a hub or router with a 10Base-T Ethernet connection. The camera will not be accessible from across the Internet unless the Internet connection is active. We cannot guarantee that your Internet connection will always be available. The frame rate of the motion image may be dependent upon the uplink speed of the Internet connection and other factors. Viewing may involve some time delay. Recommended minimum 100kbps upstream bandwidth for camera.
  2. Zoom feature not available when viewing on a cell phone.
  3. PLEASE NOTE that under certain circumstances, audio/video recording may be PROHIBITED by law. This device should be used only in compliance with all applicable federal, state and local statutes. This function can be used with a PC only. It cannot be used with a cell phone. To hear the voice transmitted from the PC, a commercially available speaker with a built-in amp must be installed. The transceiver system does not allow simultaneous transmission and reception of voices. A version upgrade may be required if you use under IPv6.
  4. Image resolution: 320 x 240 or 160 x 120.
  5. Email transmission may not be possible in some cases due to the mail server authentication system (SMTP authentication, etc.) used by your Internet service provider.

SpecificationsExpand All

  • MORE DETAILS
    • SERVER FEATURES:
    • Color Video
    • Image Compression
    • Video Streaming Format
    • Quality Video Resolution
    • Image Quality
    • Frame Rate
    • Authentication
    • Encryption
    • IPv4/v6
    • Supported Network Protocols
    • Upgrades
    • Simultaneous Viewers
    • Buffered Images
    • Image Buffer
    • Image Transfer via E-Mail (SMTP) or FTP
    • Free DDNS Compatible (Viewnetcam.com)
    • Cellular Phone Compatibility
    • Multiple Camera Views
    • Multi-Language Interface
    • Built-in Calendar Timer
    • CAMERA FEATURES:
    • Zoom
    • Image Sensor
    • Viewing Angle
    • Remote Pan Angle
    • Remote Tilt Angle
    • Maximum Pan/Tilt Speed
    • Lens Brightness
    • Required Light Intensity
    • Lens Focus Point
    • Clear Dome Lens Cover
    • AUDIO FEATURES:
    • 2-Way Audio
    • CODEC
    • Frequency Range
    • Input
    • Output
    • WIRELESS FEATURES:
    • Standard
    • Antenna
    • Wireless Technology
    • Frequency
    • Number of Channels
    • Transmission Speed
    • Security
    • INTERFACE FEATURES:
    • Network Connection
    • External I/O Connector
    • SD Card Slot for Image Buffer
    • Analog Video Output
    • Speaker/Microphone Jack
    • OTHER FEATURES:
    • Power Over Ethernet Compatibility
    • Operating Temperature
    • Operating Humidity
    • Power Source
    • Power Consumption
    • Weight (only the unit)
    • Dimensions (H x W x D)
    • UPC
LOAD MORE

Reviews

BB-HCM403A is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from High Quality would like full motion though The only thing missing is you cannot fully adjust the camera which I assumed being a first time buyer and figured spending the extra money buying a high end brand name it would fully tilt and pan but it only does so for 1/3 of the actual camera which is a bit disappointing for the money spent. I am not sure if this is common thing and I bought the wrong one but that is the only thing I would change otherwise it is great.
Date published: 2013-01-22
  • y_2016, m_12, d_10, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_BB-HCM403A, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=AGE, direction=DESCENDING)]
  • clientName_panasonic

Support

Firmware & Drivers FIRMWARE
FAQs
  • What support content is available for my product?

    Click on a link below that interests you the most:

    • Panasonic Community - Join our Community and participate in Discussions where you can learn more about our Products. You will also be able to get advice from other members and Product Experts, as well as documents, FAQ’s, tutorials, and updates.

    • Live Chat - Chat with a representative from 9am-9pm Monday-Friday and 10am-7pm Saturday/Sunday EST.

    • Email Contact - For email inquiries, send them to panasonicwebcasesf@us.panasonic.com, you will receive a response within 24-48 hours.

    • Parts/Accessories - Order parts and/or accessories from our supply chain, Encompass.

    • Service Locator - Locate the closest Authorized repair center to you for TVs, Microwaves, Vacuums, or Massage Chairs.

    • Service Request - If you need a product repaired and is NOT a TV, Microwave, Vacuum, or Massage Chair, you can use our Online Repair Request. There, you will be able to get a repair estimate, pay online, and track the repair status.
CONTACT INFORMATION
Consumer Product Support and Technical Assistance
Operating hours:
Mon-Fri 9am-9pm EST
Sat-Sun 10am-7pm EST
Panasonic USA