PCEC_12DaysofGiving_LB_12082014

Welcome to Panasonic Home Theater Projectors Support

Let´s find your Home Theater Projectors

Model Locator

Model # Locator

Need help finding your model?

Or Search by Product Type:

................................................................................................

1.

The home theater projector models do not have a 12v trigger output.

2.

The vertical refresh rate is 96HZ (4X24HZ). Each frame is displayed simply four times sequentially, then the next frame four times and so on.

3.

It will not display correctly. This format is for acquisition, storage, distribution and editing when passing the signal through electronics designed for interlace signals. It is not a standard for displaying final content, which is the main design principle of the home theater projector. These projectors are used by several Hollywood postproduction facilities during editing, and the lack of support for this format has never been an issue. This format is only supported on our 3 chip DLP® projectors.

4.

NORMAL SIGNAL LEVEL is YCbCr 16-235 bit format, which is the format used for distribution of content (Cable, satellite, HDDVD,DVD,Blue Ray). EXPANDED SIGNAL LEVEL is RGB 0-255 bit format. This is for mastering content onto D5 tape or into a high end computer editing system from film or HD source capable of RGB 0-255.

5.

You can calculate the throw distance of your projector by visiting the following webpage:http://www.panasonic.com/business/projectors/lc_learning_center.asp


Let's find your model #

Televisions

Model Number