VIERA® 65" Class VT30 Series
Plasma HDTV with 3D (64.7" Diag.)

A DLNA certified media server, such as a Windows 7 personal computer, needs to be connected to the same network as your TV. Once the DLNA server is configured on this network, press the [VIERA TOOLS] button on the remote control and select DLNA. Next, you will be prompted to select the DLNA server you wish to connect to. Select the DLNA server, then the available content will be displayed.

No. The Bloomberg application was terminated on July 12, 2011. 

The "ANT/Cable In" input is set to NOT USED.
Follow the instructions below to enable the TV input:
1. Press the [INPUT] button to display the TVs input select screen.
2. Press the green [G] button on the TV's remote.
3. Press the [RIGHT] arrow to select either cable or antenna
4. Press the [EXIT] button to exit the menu.
5. Refer to the EDITING AND SETTING CHANNELS section of your TV's operating instructions for information on programming channels, if necessary.

The horizontal spacing is 27.0 inches or 684 millimeters. The vertical spacing is 11.9 inches or 300 millimeters.

Panasonic utilizes the blinking light as a form of self-diagnostics, similar to the "check engine" light in your car. If you¿ve ever experienced that, you know that a check engine light could indicate anything from a loose gas cap to something that may require more attention. Panasonic uses the number of times the light blinks, to aid the technician in trouble-shooting the problem. The blinking light helps the technician to isolate and diagnose the issue. This in turn speeds up the repair process if repair is needed, helps keep parts costs down, and helps both you and the servicer by allowing the technician to complete a repair in one trip in many cases.

While viewing your NETFLIX queue, press the directional arrow buttons on your remote in the order listed below: [Up], [Up], [Down], [Down], [Left], [Right], [Left], [Right], [Up], [Up], [Up], [Up]

Certain JPEG, SD-Video, AVCHD, MP4 files, MKV files, MPEG-2 files, MP3 files, AAC files and LPCM files can be shared using the DLNA feature. Please see the Owner's Manual for the additional requirements.

1.   Press and hold the [Vol-] button on the side of the TV. 2.   Press the [CH] up button on the remote 3 times (while holding the [Vol-] button on the TV). 3.   Press the [Down] arrow to select "Demo mode". 4.   Press the [Right] arrow to change the "Demo mode" setting to "Off". 5.   Press the [Exit] button to exit the menu.

1. Press and hold the [Vol-] button on the side of the TV. 2. Press the [CH] up button on the remote 3 times (while holding the [Vol-] button on the TV). 3. Press the [Down] arrow to select "Demo mode". 4. Press the [Right] arrow to change the "Demo mode" setting to "Off". 5. Press the [Exit] button to exit the menu.

The CC can be displayed on the TV if the receiver (such as a set-top box or satellite receiver) has the CC set to "On".  Contact your cable or satellite company to have the closed captioning activated in the set-top box.

First, press the [INPUT] button on the remote to view the available TV inputs.  Second, press the number button on your remote that corresponds with the number that appears next to the "INPUT

If you receive a message that the TV is receiving a poor signal, or no signal, it means there is either nothing connected to the antenna/cable jack on the back of the TV, the TV is not tuned to an available channel, or the signal is not strong enough to display a picture.

The picture format in the TV or connected device may be set to ZOOM. Change the TV's picture format by pressing the [FORMAT] button on the TV's remote repeatedly to select a different picture format, such as FULL or JUST.  If the TV is already set to a picture format other than ZOOM, the picture format of a connected device, such as a cable or satellite box, may need to be changed.  Please reference the owner's manual for the connected device for the procedure to change its picture format.

An optical cable can be connected to the TV to send audio from the TV to a digital to analog audio converter.  A digital to analog audio converter can convert audio from the television's "Digital Audio Output" and send the audio to your headphones or home theater system using an RCA connection.

Connect an HDMI cable to the HDMI connection on the back of the TV labeled HDMI 1 (ARC). Then connect the other end of the HDMI cable to an ARC-enabled HDMI connection on your A/V receiver.

Press the [FORMAT] button on the remote to remove the black bars from the left and right hand side.  The options that are available to remove the vertical bars are H-Fill, Just, and Zoom.

ARC allows the TV to play the audio from TV programming (or another source device) through a home theater system or an external  A/V amplifier device connected to the TV's HDMI (ARC) connection.

The input is set to NOT USED.  Follow the instructions below to enable the input: 1.     Press the red [R] button on the TV's remote. 2.     Scroll down to highlight the desired input. 3.     Press the [LEFT] or [RIGHT] arrow to change the input label to anything other than "Not used". 4.     Press the [EXIT] button to exit the menu.

A M8 bolt with a 1.25 thread pitch is used for mounting this TV.  The minimum bolt depth is 0.39 inches or 10.0 millimeters. The maximum bolt depth is 0.63 inches or 16.0 millimeters.

Yes. The beeps can be turned off by following the steps below. A. Choose "Settings" on Home Screen.  B. Choose "Navigation Beeps".  Set "Navigation Beeps" to OFF.

An account is required to install free and paid applications.  Billing information is only required if the user wishes to purchase a paid application or service.

Yes, a 6th page will be created automatically when a new icon is added.

As a customer enters Viera Connect the update will install automatically. It is mandatory to update to the latest software when accessing Viera Connect.

A. Choose "Settings" on Home Screen. B. Choose "Customize HomeScreen". C. User can then customize the positions of the icons.