46" Class Viera® G25 Series 1080p Plasma

The stores below carry the product you are looking for. Visit the location to see first hand how Panasonic is engineering a better world for you. In-store product availability may vary, we recommend checking availability with the store location.

Panasonic utilizes the blinking light as a form of self-diagnostics, similar to the "check engine" light in your car. If you've ever experienced that, you know that a check engine light could indicate anything from a loose gas cap to something that may require more attention. Panasonic uses the number of times the light blinks, to aid the technician in trouble-shooting the problem. The blinking light helps the technician to isolate and diagnose the issue. This in turn speeds up the repair process if repair is needed, helps keep parts costs down, and helps both you and the servicer by allowing the technician to complete a repair in one trip in many cases.

No. The Bloomberg application was terminated on July 12, 2011. 

The TV input is set to NOT USED.   To enable use of the TV input: 1.  Press [MENU] on the TV remote. 2.  Scroll down to and highlight SETUP then press [OK]. 3.  Scroll down to and highlight ANT/CABLE SETUP then press [OK]. 4.  Refer to the EDITING AND SETTING CHANNELS section of your TV's operating instructions for information on scanning  available channels if necessary.

The TV is compatible with the Panasonic Skype camera model TY-CC10, the Freetalk Skype Camera model 7181, the Freetalk Skype Camera model 7182 and the Logitech TV Cam for Skype model V-U0022. Presently, the Panasonic Skype camera is being sold by the Panasonic parts department as part number N5ZZ00000193.

1. Always make sure the display is in a viewing mode which completely fills the screen (such as Just, Zoom, Full, H-FILL or 4:3 Full). The viewing mode can be adjusted using the [FORMAT] button on the TV's remote control. 2. Turn down the Picture control (contrast level) to 50% (center position) or less.  3. Briefly engage the 4:3 mode and confirm the side bars are set to "Mid", or "Bright". This can be adjusted in the Set Up menu.  4. Avoid prolonged use of static images (video games, computer images, DVD title screens, TV channel logos, etc.) during the first one hundred hours.

The input is set to NOT USED.  To enable use of the input: 1.  Press [MENU] on the TV remote. 2.  Scroll down to and highlight SETUP then press [OK]. 3.  Scroll down to and highlight INPUT LABELS then press [OK]. 4.  Press the [LEFT] or [RIGHT] arrow to change the input label to anything other than not used.

The picture format in the TV or connected device may be set to ZOOM. To change the TV's picture format, press the [FORMAT] button on the TV's remote repeatedly to select a different picture format, such as FULL or JUST.  If the TV is set to a picture format other than ZOOM already, the picture format of a connected device such as a cable or satellite box may need to be changed.  Please reference the  owner's manual of the connected device for the procedure to change its picture format.

You must connect an optical cable to the TV to send audio from the TV to another device. You may connect the other end of the optical cable to a digital to analog audio converter.  A digital to analog audio converter can convert the audio to analog and send the audio to your headphones or home theater system using an RCA connection.

While viewing your NETFLIX queue, press the directional arrow buttons on your remote in the order listed below: [Up], [Up], [Down], [Down], [Left], [Right], [Left], [Right], [Up], [Up], [Up], [Up]

The spacing is 400mm*300mm (15.8in*11.9in).

Press the [FORMAT] button on the remote to remove the black bars from the left and right hand side.  The options available to remove the vertical bars are H-Fill, Just, and Zoom.

This model is mounted using M8 bolts with a 1.25mm thread pitch. 

Press the [INPUT] button on the remote to cycle through the TV's inputs.  You can then use the navigation buttons to select the correct "INPUT" or press the corresponding number button next to the desired "INPUT".

Press the [FORMAT] button on the remote to remove the black bars from the top and bottom .  The option available to remove the horizontal bars is "Zoom".