FIND ANOTHER MODEL

Cordless Li-ion Pistol Auto Shut-Off Pulse Tool

Model number: EYFMA1P

  • 1/2" Square Drive Pin Detent
  • Auto Shut-Off Prevents Over Torques
  • Operator Visual Pass / Fail Indicator
  • Virtually No Torque Reaction
Chuck Size 1/2" square drive (12.7mm Pin-detent type)
Application M10 bolt (tensile bolt)
M12 bolt (normal tensile bolt)
M14 bolt (normal bolt)
Maximum torque in non-shut off mode(F mode, tiughtening 3 sec..) Approx. 185N-m (1,637 in-lbs)
(25.8-73.8 ft-lbs) M16 bolt
Torque control function operating range Approx. 25 - 100 N-m (310-855 in-lbs) (25,8-73,8 ft,lbs)
Torque Setting 30 Stage + F (without torque setting mode)
Flush detection mode applications L1: For lighter loads during fastener run down
L2: For prevailing torque during run down and varying joint rate applications
No load speed (unit : rpm) 0-2300
Impact Per Minute 0-3200
Weight (including battery pack) Approx. 3.3 lbs
Dimensions (L x H x W) 6-7/32" x 9-25/32" x 2-21/64"
Data Transmission With assembly qualifier (OK Fasten = Green light, NOK Fasten = Red Light
LED Light ON/OFF switch, light off after five minutes automatically
Tightening Confirmation Lamp Tightening is finished: Green light
Tightening is not finished: Red light
Retightening prevention Function Possible to set per 0.1 sec. between 0-3 sec.
Battery Indication Lamp 3 stage
Application capacity / working speed Approx. 620 pcs/pack
Approx. 0.9 sec/1pcs
(M12: 628 in-lbs, Stage: 22)
Charging time Usable charge: Approx. 50 min
Full charge: Approx. 65 min
(Battery Pack EYFB40B, Charger EY0L81B)

Accessories

  • Find accessories for your product