Cordless Li-ion Pistol Auto Shut-Off Pulse Tool

Model number: EYFLA6P

  • 1/2" Square Drive Pin Detent
  • Auto Shut-Off Prevents Over Torques
  • Operator Visual Pass / Fail Indicator
  • Virtually No Torque Reaction
Chuck Size 1/2" Square drive (12.7mm) Pin-detent type
Application M8 bolt (Tensile bolt)
M10 bolt (Normal bolt)
Maximum torque in non-shut off mode (F mode, tightening 3 sec.) approx. 120 N~m (1062 in-lbs) (88.5 Ft.lbs) M14 bolt
Torque control function operating range approx. 16-53 N~m (142-469 in-lbs) (11.8-39.1 Ft. lbs)
Torque setting 30 stage + F (without torque setting mode)
Flush detection mode applications L1: For lighter loads during during fastener run down
L2: For prevailing torque during run down and varying joint rate applications
No load speed (unit:rpm) 0~2300
IPM 0~3000
Weight (incl. battery pack) approx. 3.1 lbs
Dimensions (LxHxW) 6-25/32" x 9-25/32" x approx. 2-21/64" dia. (Width of battery pack: approx. 2-61/64")
Tightening confirmation lamp ON/OFF switch, light off after 5 minutes automatically
Retightening prevention function Finished tightening: Green / Not finished tightening: Red
Battery indication lamp Possible to set per 0.1 second between 0~3 sec.
Auto-power stop function 3 stage
Application capacity / Working speed approx. 500 pcs/pack
approx. 0.9 sec/1pcs
M10: 381 in-lbs, Stage: 23
Charging time (Battery pack EYFB30B, Charger EY0L81B) Usable charge: approx. 40 min
Full charge: approx. 65 min


  • Find accessories for your product