15.6V Cordless Metal Cutter Combo Kit
- 2.8Ah Ni-MH Battery
- Metal Cutter with Standard Blade
- Drill & Driver
EYC136NQKW Ni-MH 15.6-volt 2.8Ah 5-3/8” Metal Cutter and ½” Drill and Driver Combo Kit
See all that is included in your purchase, view What's in The Box
A great combination for mechanical, electrical, plumbing and general construction professionals
Mechanical, electrical, plumbing and general construction professionals constantly fabricate channel, bar stock and conduit for custom-sized components and drill countless holes to mount those fabricated pieces in place. The Panasonic EYC136NQKW 15.6-volt 2.8 Ah Ni-MH combo kit packages the EY3530 5-3/8”metal cutter and the EY6432 ½” drill and driver in one kit to meet nearly every cutting, fastening and drilling need in these types of work.
Using the Panasonic EY0110B charger, the battery reaches full charge in 45 minutes. The kit comes with two 15.6-volt 2.8Ah batteries.
The EY3530 metal cutter comes with a 5-3/8” 30-tooth C6 tungsten carbide-tipped blade.
The compact tool’s no-load 3,100 rpm motor has the power to cleanly cut through materials. At only 6.7 lbs., including battery, the tool is easy to handle in a variety of cutting positions and the tool’s inline cutting design makes it comfortable to use. A transparent window in the blade guard makes seeing the cutline easy and helps control metal filings. The 1/8” to 1-13/16” cutting depth is easy to adjust to match blade contact with the work piece for fast, accurate cuts. An electric brake stops the blade quickly once the trigger is released; a safety switch lock helps prevent unintended tool start-ups. The 13/16” arbor has a shaft lock button that makes blade changes simple.
Panasonic recommends using the optional EY9PM13D 50-tooth blade to cut thin metal. Replacement blades that are 5-51/16” diameter will also work in the tool. An accessory EY3500B7727 rip fence is available.
Blade and Rip Fence
Drill and driver
The Panasonic EY6432 Ni-MH 15.6-volt 2.8Ah ½” drill and driver packs high power and control into a small package that’s easy to use for general construction, plumbing, electrical or finish carpentry work.
At 4.5 lbs. including battery and only 8-3/16” long x 9” tall x 2-9/32” wide, the tool produces up to 390 in. lbs. of power for demanding drilling jobs, yet its small size makes it a good tool for work in cramped quarters.
It has a variable speed control and a reversible two-speed transmission that delivers 65-450 rpm on low speed and 200-1,450 rpm in high speed. The 18-stage clutch delivers 9 to 61 in.-lbs. stepped up in 3.0 in. lbs. increments. Maximum torque is delivered in drill-only mode.
The ergonomic design fits well in the user’s hand and helps maintain a neutral wrist position in overhead, horizontal or floor drilling/driving operations. The electric brake stops the bit from turning instantly when the trigger is released for optimal drilling and driving control.
- Kit consists of: EY3530NQMKW 15.6V Metal CutterEY6432NQKW 15.6V Drill & Driver
- Drill Driver Specs Click Here for EY6432NQKW Specs
- Metal Cutter Specs Click Here for EY3530NQMKW Specs
- Compact Size Metal Cutter - Length 13-25/32"Drill & Driver - Length 8-3/16"
- Lightweight Metal Cutter - 6.7lbs.Drill & Driver - 4.4lbs.
- High Power Drill & Driver - 390 in.lbs. of torque
- Battery High capacity 2.8Ah Ni-MH
- Extra battery Included
- Charging System 45 minute universal
- Speeds Metal Cutter - up to 3100 rpmDrill & Driver - Low 65-450 rpm, High 200-1450 rpm variable
- Clutch Drill & Driver - 18 stage
- Chuck Drill & Driver - 1/2"
- Reversible Yes, on Drill & Driver
- Blade Size Metal Cutter - 5-3/8"
- Arbor Size Metal Cutter - 20mm
- Electric Brake Yes, on both models
- Ergonomics Metal Cutter - In-lineDrill & Driver - ergonomic design to reduce fatigue
- Safety Switch Lock Lever Yes, on Metal Cutter
- Shaft Lock Button Yes, on Metal Cutter for easy blade replacement
- Cutting Depth Metal Cutter - Min. 1/8", Max. 1-13/16"
- Wrap-around Blade Guard Yes, on Metal Cutter to reduce chip splash
- Transparent Window Yes, on Metal Cutter to easily see cutting edge
- Acceptable Battery Packs Panasonic 15.6V
- Typical Applications Metal Cutter - General Construction, Finishing CarpentryDrill & Driver - General Construction, Finishing Carpentry, Electric Installation Work, Plumbing
- Carrying Case Yes, molded plastic
You May Also Like
In Stock$17.99 $12.99
In Stock$129.99 $89.99