Panasonic 28.8V 3.0Ah Cordless SDS-plus Rotary Hammer Kit

  • High Capacity 3.0Ah Li-ion Battery
  • Dual Function — Rotary Hammer/Drill
  • Tough IP — IP56 Rating
  • 3/4” SDS-plus Bit System

Back Order

Estimated Ship date: 5-7 business days
Product Actions
Add to cart options


Panasonic EY7880LP2S Tough IPTM 28.8-volt 3.0Ah Cordless 3/4” SDS-plus Rotary Hammer Kit

When installers have hundreds of holes to drill in concrete or other materials, it's time to turn to the Panasonic EY7880LP2S SDS-plus Rotary Hammer Kit. The rotary hammer is built to handle serious drilling jobs. Panasonic serial drilling tests show the power hammer can drill 180 1/2” x 1-9/16” holes continuously, only stopping to change battery packs twice in the test. Its maximum continuous drilling capacity is 9/16”-diameter x 3-1/2”-deep holes.
The 3/4” SDS-plus cordless rotary hammer can handle this tough, continuous use because it is built to handle the heat and dust that knocks out most rotary hammers working under such severe conditions. The magnesium metal gear case has a computer-designed air flow system that acts as a radiator to cool the hammer and drive mechanism, yet is sealed to keep dust out of critical components. A large fan pulls air through the tool at a high velocity, cooling the tool while preventing tool-killing dust buildup inside the system. The dust-proof, slow-start two-finger switch protects electrical components from dust contamination, yet is easy to hold, even in difficult work.

The power hammer's ergonomic design makes it comfortable to use in repetitive drilling jobs. At only 12-9/16” long x 8” tall x 3-3/16” wide and 8.49 lbs. including the 28.8-volt 3.0Ah Li-ion battery, the hammer is light enough and has a comfortable balance and handle position, even for overhead work. The soft rubber grip improves comfort and the auxiliary side handle that has a built-in depth gauge can be positioned 360 degrees for optimal tool comfort and control.

The two-speed transmission offers 0-920 rpm drilling/0-4,500 bpm hammering at 23.6 kN (2,400 kgf) of force in high/hard mode and 0-500 rpm drilling/0-2,800 bpm with 12.7 kN (1,300 kgf) of force in low/soft mode.

The rotary hammer comes with two high-capacity 3.0Ah Li-ion battery packs that reach usable charge in 60 minutes and full charge in 80 minutes when charged with the kit's EY0L82B charger.

Tough and Long-Lasting Battery Packs

The cordless rotary hammer, powered by Panasonic's 3.0Ah 28.8-volt Li-ion battery pack, is designed to deliver high output with low heat generation. The design provides twice the lifetime total performance vs. current Ni-Cd battery packs. The kit comes with the EY0L82B charger and two EY9L82B 28.8-volt battery packs. Using the supplied charger, the battery can be charged to a usable level in 60 minutes and fully charged in 80 minutes.

Tough Tools for Tough Conditions

The EY7880LP2 SDS-plus rotary hammer has an IP56 rating that proves the hammer's toughness claims. This rating means the tool has withstood demanding laboratory tests of working in extremely dusty work environments and the effects of water getting sprayed on the tool by powerful jets. In the field, it assures professional tradesmen have a power hammer that can stand up to the rigors of hard jobsite use.
The IP rating is established by the International Electrotechnical Commission (IEC) and is outlined in IEC 60529. The standard outlines a coding system that indicates the degree of protection an electrical machine's enclosure offers internal components. Based on objective testing, it assigns a rating to the enclosure's ability to keep potentially damaging solid foreign objects (dust and contaminants) and water out of the tool under increasingly difficult conditions.

The dust protection test subjects the rotary hammer to a very dusty environment and then puts it to work to assure the tool was unaffected by dust exposure. In the grueling test, the tool proved that it achieved a dust protection level of five out of six levels; the sixth level is for dust-tight tools. It's a good indication that the tool's design keeps potentially harmful contaminants out, assuring long life and top performance that professionals demand. Similarly, the water protection test put the tool up against increasing levels of water exposure. It attained a six out of eight levels rating, withstanding the effects of powerful water jets.

Whether it's extremely dust work conditions or work in damp or wet locations, users will appreciate a tool that will keep working when others would likely fail. Consult the safety and operating instructions for more information.

What's In The Cordless Rotary Hammer Box
  • 1x - EY7880 (body): 28.8V Rotary Hammer
  • 1x - EY0L82B: Charger
  • 2x - EY9L82B - 28.8V 3.0Ah Li-ion battery packs

SpecificationsExpand All

    • Description
    • IP56 Approved
    • Dual Voltage Capable
    • Drive Size
    • 2 Speed Harmmering Selection
    • 2 Speed Drilling Selection (Variable Speed/Reversible)
    • Dual Function
    • Hammering Force
    • Dust Collection Cup
    • Weight (including battery)
    • Compact Size (L x H x W) (including battery)
    • Low Battery Indicator
    • LED Work Light
    • Charging Time - Full
    • Charging Time - Usable
    • UPC


Panasonic USA